OuijaEight Posted April 17 Report Share Posted April 17 (edited) I need help with a sub box. For 2 Orion XTR PROs Dual 4 Ohm woofers. I can’t find much oh them when it comes too t/s parameters.. box will be going in a chrysler 300 max box space area is around 40 w 43 d x 20 high max gonna run them at 1500 to 2000 watts so a box that can run lows say 32 to 33 hz plz help subs back port back.. Edited April 17 by OuijaEight Quote Link to comment Share on other sites More sharing options...
OuijaEight Posted April 17 Author Report Share Posted April 17 (edited) Features: Diameter: 12" Max Power Handling: 5000 Watts Nominal Power Handling: 2500 Watts RMS Power Handling: 1250 Watts Fs (Hz): 32.3/30.5 Qts: 0.59/0.56 (.67L) Vas (cu ft): 1.256/1.198 (.36 cu m) Sensitivity: 84.4dB/83.7dB Mounting Hole Dia.: 11" Mounting Depth: 6.5" Polypropylene dust cap and paper cone is moisture and UV resistant Symmetrical tuned long-throw surround Dual interlaced conex spider Custom cast aluminum frame Tinsel leads stitched and looped across spider Venting in voice coil former is part of the enhanced voice coil cooling system Advanced forced convection cooling system Tri-cooling system Copper wound voice coil on aluminum former Edited April 17 by OuijaEight Quote Link to comment Share on other sites More sharing options...
OuijaEight Posted April 17 Author Report Share Posted April 17 (edited) I found this… hoping @Joe X can help me… looks like I’m the book they recommend 40hz tuning lower probably isn’t a thing xtrpro102.pdf Edited April 17 by OuijaEight Quote Link to comment Share on other sites More sharing options...
Joe X Posted April 17 Report Share Posted April 17 So here is a suggestion, power: to sub(s) rated, amp subsonic filter to 28Hz, minimum port clearance 3 1/2", figure is just an assembly guide: NOTE: If building outside you need to build a cardboard dummy box to test fit before building the real box. NOTE: Box can still be used with better subs for a future upgrade. Quote Link to comment Share on other sites More sharing options...
OuijaEight Posted April 18 Author Report Share Posted April 18 Ok, thanks so much. How much power do you recommend putting to them? Quote Link to comment Share on other sites More sharing options...
Joe X Posted April 18 Report Share Posted April 18 You can use a 1500W RMS amp no worries, just no clipping, subsonic set to 28Hz, careful with bass boost and other tone controls after setting gains. Quote Link to comment Share on other sites More sharing options...
OuijaEight Posted April 18 Author Report Share Posted April 18 Thanks appreciate you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.