Jump to content

Not so regular cab Chevy - Back in business


Recommended Posts

Posted

Well since im going to be sending my 3000 to db-r soon im directing my attention elsewhere

I know I need to get my doors wrapped, but $$ is tight and I can't wrap vinyl..

So im considering wrapping them with the same stuff as my console- It stretches, looks pretty good imo, and I have worked with it 3-4 times before.

What do you guys think, it will look alright?

On another note I haven't been extremely satisfied with my mids/highs lately. With the box out of the truck for a couple weeks im fiberglassing it more, and while im at it I thought I would go ahead and take 2-3 days to glass some A-pillars and order another set of 5.25s down the line.

Suggestions welcome :)

Posted

Made a little work station to test out my new idea..

DSCN1903.jpg

DSCN1902.jpg\

Pulled these 4" dayton mids i bought a while back outta the closet..

I havent been impressed with the clarity of my mids/highs so im going to throw these in the a-pillars and parallel them with the 5.25s on the 100.4.

Plan to run this all like a 3-way setup. dont really know what theyll be set at , just play with setting til i hear what i like

We'll see how well it plays out tomorrow but this is just to get some more clear sounding vocals, they seem a bit muffled right now..

Posted
nice truck nice build

Thanks treo

Spent all day messin with these things because of the way I have to insert the pillars into the truck almost anywhere i locate them they hit the dash when installing

DSCN1904.jpg

DSCN1905.jpg

DSCN1906.jpg

DSCN1907.jpg

was a bitch getting them identical because the passenger side has a handle attached to it (wont have it anymore) and the shape of it is different which is why the speaker doesnt sit all the way in that one like the driver side, little cutting will take care of it

DSCN1909.jpg

DSCN1910.jpg

DSCN1911.jpg

these are just temporary since im broke and had these speakers laying around. eventually ill buy a component set, cut these up and make a new set.

gonna glue fleece to the pillars and resin that, then stretch the fleece and begin glassing tomorrow.. with the weather being so damn cold and rainy here i dont know if it will happen but its the plan

Also sent my 3000D out to dB-r today, should have it back first week in Jan

Posted

those pillars are going to be nice! can't wait to see more pics

Team sundownWESTCOASTSPL.COM we're throwing dbdrag events very soon visit the website for details

Posted

I love this build! your glass work is really improving man! keep it up!

1999 Chevy Tahoe

Level 4 15"

AP 3000d

Rockford and Phoenix Gold Componets

T400.2

Mechman 250 amp Rhino

2 Kinetik 2400

GET LOUD : STAY LOUD : SLAP RESPONSIBLY

Posted
^No bushing around the wire in the floor FTL. :o

They are there just they fell out when i was moving the wire around taking the carpet out, theyre back in now.

Nice power supply. :clapping: Lucky bastard...

Yah the $299 i spent on it doesnt seem lucky lol.. Is nice to have sometimes though :)

Got a bit done today...

DSCN1912.jpg

Fleece glued onto the pillars

DSCN1913.jpg

After doing a test section and finding out the resin didnt cause the glue to release went ahead and resined them up

Ran outta 3M so I couldnt do the top of the passenger side pillar

DSCN1916.jpg

Since the trim piece at the top of the back window is kind of arched there was a gap between it and the metal boot cover piece so I stacked up some weather stripping to fill in the gap

DSCN1914.jpg

DSCN1918.jpg

DSCN1917.jpg

DSCN1919.jpg

Wrapped

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...