95_1500 Posted July 1, 2010 Author Report Posted July 1, 2010 how did you do the math for getting how much power at 4 ohms? I was trying to figure it out with my Powebass but I am drawing a blank 80v of clean power Voltage squared divided by ohm load 80v x 80v / 4 ohms = 1600 / 2 = 3200 etc etc Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted July 2, 2010 Author Report Posted July 2, 2010 Decided to be unoriginal in my decal placement Gonna put the banner on once I remove the masking tape on the windshield after a few days Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
98crewcab Posted July 4, 2010 Report Posted July 4, 2010 NICE............have to say, never thought of that spot. looks good! making you proud bro. just uploaded tons....(216 pics)....to photobucket. will start build log after this weekends progress. finished console, minus paint, and started doors. teaser pic..... just kidding on the teaser pic....had to get a laugh out of ya!!! 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk!
95_1500 Posted July 4, 2010 Author Report Posted July 4, 2010 NICE............have to say, never thought of that spot. looks good! making you proud bro. just uploaded tons....(216 pics)....to photobucket. will start build log after this weekends progress. finished console, minus paint, and started doors. teaser pic..... NICE, cant wait to see it! And holy shit you got me good with that pic, like "GOD DAMN!" then I scrolled down lmao. Ive been a lazy fawker lately.. Might deaden my doors today... Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
98crewcab Posted July 4, 2010 Report Posted July 4, 2010 lovin the SUNDOWN vinyls.....representin'-lol you going to be ready for the show you have coming up? bet its pretty damn loud and wish i was close enough for a demo 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk!
95_1500 Posted July 4, 2010 Author Report Posted July 4, 2010 lovin the SUNDOWN vinyls.....representin'-lol you going to be ready for the show you have coming up? bet its pretty damn loud and wish i was close enough for a demo Yeah gotta rep what ya run It will definitely be ready, got the driver door completely apart and cleaned, gonna start deadening for a while tonight before I head out for some partyin Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted July 4, 2010 Author Report Posted July 4, 2010 Was a big ass layer of crap on the metal Cleaned off First bit of deadener Throw in some foam Now waiting for that to setup so I can shave it down and deaden over the whole thing Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
98crewcab Posted July 5, 2010 Report Posted July 5, 2010 damn, and you say I have patience.....lol. not looking forward to stripping my doors down that far. but gonna have to soon.......... looks like it should be one solid ass door when your done 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk!
n8ball2013 Posted July 5, 2010 Report Posted July 5, 2010 wow thats ballsy i planned on clearing some of my doors out but goddamn lol THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
95_1500 Posted July 5, 2010 Author Report Posted July 5, 2010 damn, and you say I have patience.....lol. not looking forward to stripping my doors down that far. but gonna have to soon.......... looks like it should be one solid ass door when your done Yeah its pretty dead even without the deadener over the foam.. wow thats ballsy i planned on clearing some of my doors out but goddamn lol Yeah I didnt plan to go this far, it just kind of happened like "some foam would fill that in nicely" haha Annnnd I dont know if I used a lot more foam on this or didnt clean all the degreaser off the door but as this began to solidify and push out it started falling down the door... Off to get another can Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
Recommended Posts
Archived
This topic is now archived and is closed to further replies.