loganuf Posted August 10, 2008 Report Share Posted August 10, 2008 I am looking for a new amp to run four 12" L7's off of.....how many watts would this amp really push out at 2 ohms....heres the specs of it..... Brand New POWER ACOUSTIK OV1-5500D 5500 WATT MONO CLASS D AMP NEW This Item Is Brand New! In Factory Box!! Never Been Opened!!! Limited Time Offer! Huge Savings! Brand New Power Acoustik OV1-5500D Class D Mono Block 5500W Gothic Series Amp Hi Speed Digital Circuitry Fully Regulated PWM Power Supply Four Way Protection Circuit 1 Ohm Stable Bridging Synchronization Variable Low Pass 50Hz-150Hz Variable Subsonic Filter 15Hz-40hz Variable Subwoofer EQ @ 45Hz Phase Switch 0-180 Remote Dash Mount Low Level Gain Control (Bass Knob) With Cable Frequency Response: 15Hz to 150hz S/N Ratio: 100 db THD: 0.5% System Distress Indicator Inputs Sensitivity: 200mv-8v Dual Mono Speaker Output Connectors Platinum Plated Heavy Duty Power & Speaker Terminals 1700W RMS x 1 @ 4 Ohms 2500W RMS x 1 @ 2 Ohms 3200W RMS x 1 @ 1 Ohms 5500W MAX x 1 @ 1 Ohms 5x 30A Fuse Rating Dimensions: 14"w x 2.5"h x 12"d Quote 2000 Eddie Bauer Expedition: Alpine CDA 9883 2x 18" DC lvl 4 D2 10.7 cu ft box 33hz knu 1/0 wire amp: Kicker ZX2500.1 Kinetik Link to comment Share on other sites More sharing options...
Forceww Posted August 10, 2008 Report Share Posted August 10, 2008 Probably about 1500-2000 watts rms. Quote **New setup in the works** Shocker sigs ftw! *Breakin Glass and Kickin Ass* Team SBC Team Full Force Refs SMD-derrick, Bangin Explorer, Exposport, Bass 14 CA-connersdad19 x2, Ridnclean, Deafdreamz, nismos14 cac.org-Spl Guru, Andrew, dblover, lunari Link to comment Share on other sites More sharing options...
usmc7980 Posted August 10, 2008 Report Share Posted August 10, 2008 How many watts are you trying to get and at what Ohms, I assume 2 ohms because thats what you said but want to be sure? And how much money do you have to work with? Quote Link to comment Share on other sites More sharing options...
loganuf Posted August 10, 2008 Author Report Share Posted August 10, 2008 How many watts are you trying to get and at what Ohms, I assume 2 ohms because thats what you said but want to be sure? And how much money do you have to work with? im tryin to get like 2000 watts at 2 ohms....budget is under 400 Quote 2000 Eddie Bauer Expedition: Alpine CDA 9883 2x 18" DC lvl 4 D2 10.7 cu ft box 33hz knu 1/0 wire amp: Kicker ZX2500.1 Kinetik Link to comment Share on other sites More sharing options...
Forceww Posted August 10, 2008 Report Share Posted August 10, 2008 There is a Orion 2500 for sale for 450obo in the fs section. Check that amp out. Itl put out right around a solid 2000 watts at 2 ohm. And it will blow that pa amp out tha water Quote **New setup in the works** Shocker sigs ftw! *Breakin Glass and Kickin Ass* Team SBC Team Full Force Refs SMD-derrick, Bangin Explorer, Exposport, Bass 14 CA-connersdad19 x2, Ridnclean, Deafdreamz, nismos14 cac.org-Spl Guru, Andrew, dblover, lunari Link to comment Share on other sites More sharing options...
Brick2560 Posted August 10, 2008 Report Share Posted August 10, 2008 AudioQue 2200D for 389 shipped Quote "Buy some shit, Build some shit, Bang some shit!" - Dr. DB Joe owns my soul. Refs: Duct_Tape123, Derrick824 Link to comment Share on other sites More sharing options...
mrwigglezdj Posted August 10, 2008 Report Share Posted August 10, 2008 for the money you cant go to wrong with the pa i had the same 5500 on my 8 15s at 1ohm and it was loud but for a extra 300 i got the mojo 2500 and it was night and day difference, so with that being said it is worth waiting a extra month or however long it takes to buy a quality product like kicker,fosgate,memphis,sundown and orion ect. Quote Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
Forceww Posted August 10, 2008 Report Share Posted August 10, 2008 (edited) i agree wit mrwigglezdj if thats absolutely all you have to work with you can look into so different amps but if you CAN get more i would also recommend waiting and getting a better amp Edited August 10, 2008 by Forceww Quote **New setup in the works** Shocker sigs ftw! *Breakin Glass and Kickin Ass* Team SBC Team Full Force Refs SMD-derrick, Bangin Explorer, Exposport, Bass 14 CA-connersdad19 x2, Ridnclean, Deafdreamz, nismos14 cac.org-Spl Guru, Andrew, dblover, lunari Link to comment Share on other sites More sharing options...
mrwigglezdj Posted August 10, 2008 Report Share Posted August 10, 2008 but if you have to run pa i would recomend going with the pa 3000d and get 2 and strap them and run at 2 ohms .... be around 25-3200 watts rms at 2 Quote Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
loganuf Posted August 10, 2008 Author Report Share Posted August 10, 2008 but if you have to run pa i would recomend going with the pa 3000d and get 2 and strap them and run at 2 ohms .... be around 25-3200 watts rms at 2 how many watts do you think i will get out of this amp alone? at 2 ohms? Quote 2000 Eddie Bauer Expedition: Alpine CDA 9883 2x 18" DC lvl 4 D2 10.7 cu ft box 33hz knu 1/0 wire amp: Kicker ZX2500.1 Kinetik Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.