Hifonics Bxi2608d

[truck_buster23]

Ok, what sub is it? what coils does it have? Your outputs are for easy wiring flexibility

sub is Hifonics Olympus OLM2415 dual 2 ohm

[reinke]

Iirc you have to bridge the channels....you can't run a set of leads into each + and - atleast that wiring option wasn't in the hifonics manual....b/c I too wondered about it when my dad first got those amps.

Heres Maxxsonics number call them and ask....

847-540-7700

i dont need there number they ar ein my speed dial already dude.

on coil 1 take the positive and negative and hook it to a positive and negative on the amp. do the same thing for channel 2

[wL<3bass]

i dont need there number they ar ein my speed dial already dude.

on coil 1 take the positive and negative and hook it to a positive and negative on the amp. do the same thing for channel 2

I was talking to the OP

[truck_buster23]

Ok I will just wire the sub in Parallel and bridge the amp like in the manual.

[truck_buster23]

Also dou you guys suggest using the sub sonic filter? The box I'm building will be tuned to 36hz.

[reinke]

leave it at the lowest setting

[truck_buster23]

leave it at the lowest setting

cool, i think it's 15hz to 35hz.

[reinke]

i am not sure. but from what i was told it is either set at 15 or the other number there is no inbetween settings. maxxsonics told me for the most part to leave it at the lowest setting

[truck_buster23]

Thanks will do. what do you know about ht bass eq? LOL all I need is for you to come over and set my amp up. J/P. I'm new to hifonics.

[reinke]

i used to be big into home theater set-up's. once i had my son and he kicked in my t1503k's i got rid of it all. i am newer to hifonics as well. and i will never run another kind of amp.