DillKil10 Posted October 2, 2008 Report Posted October 2, 2008 I have two 12" Pioneer Premier Champion Series Pro subwoofers. 3000w max, 1000w rms each. I want an amp that has plenty of power, thinking towards rockford fosgate or memphis. But can you run a mono amp with 2 subs? Thanks Quote
Pitbullx Posted October 3, 2008 Report Posted October 3, 2008 what ohm subs? and you cant go wrong with RF Quote Team Devastation Mixed Martial ArtsMachado Brazilian JiujitsuOnce I lock it on there's no escape I don't train to make you tap, I train to tear your arm, leg, or head off. Its your job to tap before I can do that -Pain is only weakness leaving the body, its kill or be killed and only the strong survive...Rockford FosgateDigital DesignsFi Car AudioCrossfire Car Audio
dmanson Posted October 3, 2008 Report Posted October 3, 2008 I have two 12" Pioneer Premier Champion Series Pro subwoofers. 3000w max, 1000w rms each. I want an amp that has plenty of power, thinking towards rockford fosgate or memphis. But can you run a mono amp with 2 subs? Thanks mono amps works wonderful with subs. Quote 2-DC 15XLM2 D.7s 1-DC 5K amp (1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR) 3 runs 1/0ga for power and 2 runs of 1/0ga for negative. (2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear) Audiocontrol 3.1. DC power 260amp alternator w/MLA Module
DillKil10 Posted October 3, 2008 Author Report Posted October 3, 2008 The sub is dual 4 ohm. How do you hook up two subs with one mono amp? i don't see how its possible with just one set of pos neg speaker input. Thanks for the responses Quote
a_steezy Posted October 3, 2008 Report Posted October 3, 2008 The sub is dual 4 ohm. How do you hook up two subs with one mono amp? i don't see how its possible with just one set of pos neg speaker input.Thanks for the responses you're gonna have to run it down to 1 ohm... not real sure on them, sundown has some good stuff, the rockford amps are one ohm stable this is how you'd wire.. http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=4 Quote '98 Dodge Durango 5.9L 5% front windows, 2.5% on all backs Alpine CDA-9883 Kicker ZX350.4 Kicker KS650's in all doors Kicker 1/0 hyperflex
a_plus Posted October 3, 2008 Report Posted October 3, 2008 fosgate t20001!!!! Quote my setup: alpine iva-w205 fosgate t30001 rf t8004 re 6x9 2 re sx 15's 4 inch fosgate fanatic q components hertz 6.5 comp kicker 1/0 wiring ipod direct connect 2 optimas batts in the middle of rebuilding
banginAltima Posted October 3, 2008 Report Posted October 3, 2008 One Sundown 3000 would be awesome, it would be the easiest on the electrical. Memphis amps are power hungry and burn up if you drop volts, esp. the mojo. RF are a little less power hungry but normally will just go into protect if you drop volts. Quote If you build it, db's will come... NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09). Competition Only Record Holder Trunk 0-500 watts---148.1 2006 Nissan Altima 3.5 SE Currently Rebuilding.... My 150db Plus Trunk Build I do box designs. [benH] 6:24 pm: clipping doesn't really hurt subs [benH] 6:24 pm: being an idiot is what blows subs
a_steezy Posted October 3, 2008 Report Posted October 3, 2008 One Sundown 3000 would be awesome, it would be the easiest on the electrical. Memphis amps are power hungry and burn up if you drop volts, esp. the mojo. RF are a little less power hungry but normally will just go into protect if you drop volts. x2 on the sundown. and there was a thread on here a couple days ago of people burning up memphis amps due to the volt drops Quote '98 Dodge Durango 5.9L 5% front windows, 2.5% on all backs Alpine CDA-9883 Kicker ZX350.4 Kicker KS650's in all doors Kicker 1/0 hyperflex
banginAltima Posted October 3, 2008 Report Posted October 3, 2008 fosgate t20001!!!! The only thing about getting a RF T2000 is that you would have to set the gain up to 3/4 or more the get the 2000 watts depending on how strong of an amp it was. The higher you set the gains the more the demand on the eletrical.... Quote If you build it, db's will come... NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09). Competition Only Record Holder Trunk 0-500 watts---148.1 2006 Nissan Altima 3.5 SE Currently Rebuilding.... My 150db Plus Trunk Build I do box designs. [benH] 6:24 pm: clipping doesn't really hurt subs [benH] 6:24 pm: being an idiot is what blows subs
Bigg Boy Posted October 3, 2008 Report Posted October 3, 2008 YGPM Quote Dodge Magnum with custom 300c front end, laid out on air bags *4) 12" Cadence Daytona walled *1) AudioQue 20k *270a DC Power Alt (Dual coming soon)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.