stuart_goodenough Posted October 10, 2008 Report Posted October 10, 2008 so i finally talked my buddy into bulding a box for his w3's and i was looking at this box on their site http://mobile.jlaudio.com/products_enclosu....php?page_id=12 the box at the top does anyone know the dimentions for it but any chance and if not what hz should i tune the port(s) to
wL<3bass Posted October 10, 2008 Report Posted October 10, 2008 What size subs and music? Anywhere from 30-38hz. Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
stuart_goodenough Posted October 10, 2008 Author Report Posted October 10, 2008 so like 34??? rap music and 12's
stuart_goodenough Posted October 10, 2008 Author Report Posted October 10, 2008 lol "its not a box" then wtf is it? i know right lol
wL<3bass Posted October 10, 2008 Report Posted October 10, 2008 I like 33-35hz on 12s with rap/hiphop, they can hit the lows and still not suffer on the slightly higher bass. Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
stuart_goodenough Posted October 10, 2008 Author Report Posted October 10, 2008 thanks how do i figure the size of the port like lenth and stuff beacuse im kinda new to building boxes and the only one i have built i had the dimentions given to me.. is there like a formula that i would go by to get 34hz
pstone11 Posted October 10, 2008 Report Posted October 10, 2008 You could use the calculator on RE or JL, amatt's on this site..... or find a website that does really nice enclosure plans for cheap......... hmmm......wonder where a site like that would be...... Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
stuart_goodenough Posted October 10, 2008 Author Report Posted October 10, 2008 accually i found the recommended dimention on the jl website so im jsut going to built it from there thanks for all your help tho
Recommended Posts
Archived
This topic is now archived and is closed to further replies.