Neo_frog Posted November 1, 2008 Report Share Posted November 1, 2008 (edited) Post what kind of electrical upgrades you have dome with your setups and list what they are running. List everything like wire, amps, alts, batts, modules, etc. This will give everybody some idea of what they should do for power upgrades. Power: Alt = 300A Iraggi Batt = (4) Kinetik HC2400s Wire = 4x 1/0 from under hood, copper buss bars, and 1/0 in battery bank Setup: Amps = (2) Memphis MCD4KWs (pulling 400A each) 8000W RMS @ 1-ohm and (1) Memphis MCA2004 4 channel. EDIT: Also Big 3 with double runs of 1/0 Memphis wire. Edited November 1, 2008 by Neo_frog Quote Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/ Link to comment Share on other sites More sharing options...
97maxima Posted November 1, 2008 Report Share Posted November 1, 2008 (edited) power alt-stock batt-hc-1800,hc-800,<----------------underpowering amps wire-0 quage thr-out,big 3 in 0 setup amps-2x crunch pzi.3000.1s(200 amps of fusing total),strapped@2 ohms,crunch p.900.4(30 amps of fusing) Edited November 1, 2008 by 97maxima Quote American Bass*DC Power Link to comment Share on other sites More sharing options...
Aaron813 Posted November 1, 2008 Report Share Posted November 1, 2008 Alt Iraggi 230 ro 280 something like that it doesnt do much anyway Batt Kinetik 2400 in back optima yellow top in front wire all Knukonceptz 0/1 fleks Setup 2 audioque HDC3 15s 1 XXthor Hifonics amp 3000 rms great amp Quote Link to comment Share on other sites More sharing options...
raytard Posted November 1, 2008 Report Share Posted November 1, 2008 Power: 200a iraggi alt hc1400 under hood, hc600 in trunk (getting upgraded soon) monster 0g big 3/front to rear run, kicker 4g rear bat-amp setup: 1 gto1400d (160 amp fused) 2 gto1004 (i think 80a fused, dont remember, mayb 60 apiece?) Quote Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC Link to comment Share on other sites More sharing options...
Neo_frog Posted November 1, 2008 Author Report Share Posted November 1, 2008 BTW, I said it will give ppl an idea of what to do...this includes me haha. As of now, my status in untested at full power so this helps me get an idea of whether I'll be safe too. I'm kinda new to 5000+ Watt systems. Quote Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/ Link to comment Share on other sites More sharing options...
97maxima Posted November 1, 2008 Report Share Posted November 1, 2008 neo what batt is under the hood Quote American Bass*DC Power Link to comment Share on other sites More sharing options...
Neo_frog Posted November 1, 2008 Author Report Share Posted November 1, 2008 neo what batt is under the hood Oh, sorry. I have an Optima Yellow D34 under the hood. Quote Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/ Link to comment Share on other sites More sharing options...
raytard Posted November 1, 2008 Report Share Posted November 1, 2008 for reference, i dont think i've ever gotten mine to completely max out, these amps wont go into thermal or clipping protection, only voltage, i think its that hc600's fault...the lights barely dim in my car though, need to reinforce the rear ground and do a stronger rear batt to get full potential. Quote Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC Link to comment Share on other sites More sharing options...
Chris from Mi Posted November 1, 2008 Report Share Posted November 1, 2008 Orion 2500D Jbl Gto 75.4 Excessive amperage 200 amp alt 1 run 1/0 klm soon to be- odyssey pc2150 Quote Orion 2500D, Jbl Gto 75.4 Team Wolfpack Audio FSQ 15" d2, mb quart xover, tweets peerless 6.5 mids Alpine cda-105 optima up front Knu klm 1/0 Link to comment Share on other sites More sharing options...
98HOEONSIXEZ Posted November 1, 2008 Report Share Posted November 1, 2008 Post what kind of electrical upgrades you have dome with your setups and list what they are running. List everything like wire, amps, alts, batts, modules, etc. This will give everybody some idea of what they should do for power upgrades.Power: Alt = 300A Iraggi Batt = (4) Kinetik HC2400s Wire = 4x 1/0 from under hood, copper buss bars, and 1/0 in battery bank Setup: Amps = (2) Memphis MCD4KWs (pulling 400A each) 8000W RMS @ 1-ohm and (1) Memphis MCA2004 4 channel. EDIT: Also Big 3 with double runs of 1/0 Memphis wire. a few ohio gens +1,a few runs of 0 guage +1, a few group31s in the back +3... .you know. all the ordinary stuff Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.