uhoh_45 Posted January 13, 2009 Report Posted January 13, 2009 (edited) i do 15^2 of port per cubic feet so yeah its alot thats what i was told was acceptable when i got into this shit/ more port area =better Edited January 13, 2009 by uhoh_45 Quote R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log
cunokyle Posted January 13, 2009 Report Posted January 13, 2009 (edited) roughly 20 cubes after displacement 300^2 of port tuned to 35 hz i know its not same as meades if you dont like it see what james has to offer You will need to brace the port pretty good if you do the build this way. That is a long stretch of port along the back side. Also, the smaller port area will result in port noise. Now, how much port noise vs what size port I could not really tell you. Edited January 13, 2009 by cunokyle Quote The woofers might suck all the air out your lungs (if you stand too close) When the monster hums
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.