Jump to content

Recommended Posts

Posted

the specs seem to be pretty good. the sensitivity is pretty high and the freq responses should work good.

----reference's----

meade916

Posted
the specs seem to be pretty good. the sensitivity is pretty high and the freq responses should work good.

if im hookin them up with a 4-channel it dosent matter about what kind of stereo beacuse im not using the radio right??

starting fresh, chrysler 300.. no subs amp nothin

I NEED HELP looking to purchase saz-1500d and 15" 1000rms subREFS- feedback/refs.. click!

Posted

kinda. you want one with decent pre-out voltage. i always look for one with a high pass filter built into the radio. it helps with distortion.

----reference's----

meade916

Posted

I've heard those comps quite a few times, and they sound pretty good, but you can find them for alot cheaper than 219. shop around, I hear of people getting them for around 100 bucks, give or take.

My System:

Pioneer AVH-P3200BT

4-Dayton 7 inch reference series (front doors)

8-Onkyo 3/4 inch tweeters (dash)

1-Sundown Audio 100.4D (mids/highs)

2-18" BTL's (for now)

Crescendo 3kwp (for sale)

Complete rebuild coming soon...

Posted

I personally think they suck...would give them maybe a 6/10 I had a $35 pair of coaxial that sounded about equal.

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Posted

The midbass is okay. The tweeters really shine in this set. I just installed a pair of the polk db1001 tweeters in my dads aveo last night and i am very happy with the results. They do have a very large footprint for a 1" tweeter.

Posted

these sound awesome and with the right install midbass sounds killer on anything, i got the db6500 comps in the front and db651 coaxs in back ran from a sony 600w4ch and its loud and clean, and also have a pioneer 680 running it to, just make sure u give em a good amount of wattage cause with low power below 50watts rms and they sound like shit, i had mine hooked to my house stereo when i first got em to test em with around 300rms and they are loud and clean and really good sq also, i dont kno about the full 300peak watts but they will shine with around 50-150rms just make sure u got ur hpf set right or u wont get no midbass at all,

i got my hpf set to 80htz on headunit and its awesome match with my 5500 15 in the trunk, and i got my mids n highs for around $100 total, 60-70 for comp set and 30 for coax from local shop, he has some more of the polk db stuff, i might go pick up some more of the midbass's and what knot and make me a diff setup, anyways with right tuneing they sound heavenly, i acually like em better than my kicker ks comps

here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp

here's a link to my other system my 90 geo prizm test car

heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit

redblob.gifbouncing%20blob.gif2yooj7m.pngmodel14.gif

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 525 Guests (See full list)

×
×
  • Create New...