sodfamily Posted January 13, 2009 Report Posted January 13, 2009 I just picked up 2 SAE-1000D's and was reading over the manual on how to hook them up. I had a couple of questions and hope someone on here could answer them for me. 1) Can I just run my RCA's into one unit and use the BR out and run a single RCA into the BR in of the other amp? 2) This should allow me to use just one bass knob right? 3) Will I also still have to fine tune both amps? (ie gain, subsonic, and so on) If someone thinks there is another way of doing this please feel free to give suggestions Head Unit: Alpine CDA 9887 Sub Amps: 4 RF2500's Subs: 8 SA-12's Walled Comp Amp: 1 RF600.2 (for now) Comps: (4) 6.5 Punch Mid Pros and 2 Punch Pro Tweeters Batteries: (1) XS D5100 (5) D3100 Power Cables: 2 runs of 2/0 power and ground each front to back(Try-Star) Alternator: Dual Mechman Rhino 250's Deadener: Fatmat / Damplifier Pro
banginAltima Posted January 13, 2009 Report Posted January 13, 2009 I just picked up 2 SAE-1000D's and was reading over the manual on how to hook them up. I had a couple of questions and hope someone on here could answer them for me.1) Can I just run my RCA's into one unit and use the BR out and run a single RCA into the BR in of the other amp? That will be fine. The amp that you use for the positive speaker wire need to have the RCA's hooked up to it. 2) This should allow me to use just one bass knob right? Yes 3) Will I also still have to fine tune both amps? (ie gain, subsonic, and so on) NO If someone thinks there is another way of doing this please feel free to give suggestions Edit: http://www.soundsolutionsaudio.com/forum/i...?showtopic=7406 If you build it, db's will come... NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09). Competition Only Record Holder Trunk 0-500 watts---148.1 2006 Nissan Altima 3.5 SE Currently Rebuilding.... My 150db Plus Trunk Build I do box designs. [benH] 6:24 pm: clipping doesn't really hurt subs [benH] 6:24 pm: being an idiot is what blows subs
sodfamily Posted January 13, 2009 Author Report Posted January 13, 2009 Thanks for the link, very helpful.... Head Unit: Alpine CDA 9887 Sub Amps: 4 RF2500's Subs: 8 SA-12's Walled Comp Amp: 1 RF600.2 (for now) Comps: (4) 6.5 Punch Mid Pros and 2 Punch Pro Tweeters Batteries: (1) XS D5100 (5) D3100 Power Cables: 2 runs of 2/0 power and ground each front to back(Try-Star) Alternator: Dual Mechman Rhino 250's Deadener: Fatmat / Damplifier Pro
Derrick824 Posted January 13, 2009 Report Posted January 13, 2009 Just so it's clear, only use the br out if you're strapping the amps. It is not a pass-thru feature.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.