zfrerichs Posted February 1, 2009 Report Posted February 1, 2009 So i am thinking about switching it up and going to sundown, but i need some info first. i want to run 3 svc 4 ohm speakers, will it be run at 1.34 ohms per channel? really dont want to have to buy two Quote Roseville, CA
wL<3bass Posted February 1, 2009 Report Posted February 1, 2009 So i am thinking about switching it up and going to sundown, but i need some info first. i want to run 3 svc 4 ohm speakers, will it be run at 1.34 ohms per channel? really dont want to have to buy two Running a/b class amps at lower than rated loads just increases distortion....and if it your mids and highs that's just dumb in my opinion....just get two 100.2s Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
ssackett Posted February 1, 2009 Report Posted February 1, 2009 (edited) Dont do it.. Edited February 1, 2009 by ssackett Quote Team S.S.C. DB Drag Street A 2011 National Champ DC Audio Dealer Nor Cal AA Dealer Incriminator Audio Dealer CA Sundown Audio Dealer [email protected]
zfrerichs Posted February 1, 2009 Author Report Posted February 1, 2009 well thanks. i guess ill have to run two of them. mids and highs no monos. but thanks Quote Roseville, CA
ssackett Posted February 1, 2009 Report Posted February 1, 2009 Shoot Jacob an email. Im sure he can point you in the right direction. Quote Team S.S.C. DB Drag Street A 2011 National Champ DC Audio Dealer Nor Cal AA Dealer Incriminator Audio Dealer CA Sundown Audio Dealer [email protected]
jcro_61 Posted February 1, 2009 Report Posted February 1, 2009 You could run 2 of the speakers in series then parallel that with the 3rd for a nominal 2.67 ohm load. Quote 2015 Chevy Sonic CTX65cs - Image Dynamics 6.5" front CTX65 - Image Dynamics 6.5" rear Rockford Fosgate 3Sixty.3Rockford Fosgate PBR300x4Sundown SAE-600D Sundown SD3-10
Andrew2944r Posted February 1, 2009 Report Posted February 1, 2009 Do not run that amp @ 1 ohm Quote Team Ampere Audio
Derrick824 Posted February 1, 2009 Report Posted February 1, 2009 Sounds like you need an sax-100.4 and a sax-100.2. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.