thehoe92 Posted March 23, 2009 Report Posted March 23, 2009 Can I run two sets of t162s components off the t800.4? It says 100 X 4 at 2 ohms. The RF are 4 ohms but is it possible for me to wire them to 2 ohms and then run it to the amplifier? Any help would be really appreciated. Wouldnt be thehoe92 without teh purple
dmanson Posted March 23, 2009 Report Posted March 23, 2009 i'd suggest running each channel at 4 ohm. that amps puts out too much for those speakers at 2 ohm. my homie has a T8004 with 2 RF components on the front channels and one on the rear channels. let's just say the front channels keep blowing and the gain is barely up. that amp does about 300rms at 2 ohm. 2-DC 15XLM2 D.7s 1-DC 5K amp (1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR) 3 runs 1/0ga for power and 2 runs of 1/0ga for negative. (2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear) Audiocontrol 3.1. DC power 260amp alternator w/MLA Module
wL<3bass Posted March 23, 2009 Report Posted March 23, 2009 The T8004 does 100wrms x4 @ 4ohm if not more....even though its only rated at 50wrms. Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
thehoe92 Posted March 23, 2009 Author Report Posted March 23, 2009 i'd suggest running each channel at 4 ohm. that amps puts out too much for those speakers at 2 ohm. my homie has a T8004 with 2 RF components on the front channels and one on the rear channels. let's just say the front channels keep blowing and the gain is barely up. that amp does about 300rms at 2 ohm. I know they are over rated but damnnn. its just seems weird to me to be putting two sets of comps into each the rear and front. tell me I'm wrong and its possible. Wouldnt be thehoe92 without teh purple
wL<3bass Posted March 23, 2009 Report Posted March 23, 2009 I know they are over rated but damnnn.its just seems weird to me to be putting two sets of comps into each the rear and front. tell me I'm wrong and its possible. I think you mean underrated... Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
thehoe92 Posted March 24, 2009 Author Report Posted March 24, 2009 I think you mean underrated... yeah whoops. RF overrated so any word on me putting 2 sets of t162s on the amp. just seems weird? Wouldnt be thehoe92 without teh purple
Recommended Posts
Archived
This topic is now archived and is closed to further replies.