cnate777 Posted June 13, 2010 Author Report Share Posted June 13, 2010 Rockford Fosgate Sundown Audio DC Power Inc XS Autometer Pioneer Link to comment Share on other sites More sharing options...
BeatBox Posted June 13, 2010 Report Share Posted June 13, 2010 damn that battery tray looks like it was meant to be there! good job! Link to comment Share on other sites More sharing options...
cnate777 Posted June 13, 2010 Author Report Share Posted June 13, 2010 I had to cut my day short for a birthday party....goodee...not....but anyway got the 3" hole saw out and cut my hole for the wire to run into the truck from the engine compartment......soldered 2 ring terminals on.....and ran one strand....not a lot for the couple of hours I got.....Oh, I also trim fit the drivers side rear quarter trim panel it was a little too long so I trimmed it all up....... Rockford Fosgate Sundown Audio DC Power Inc XS Autometer Pioneer Link to comment Share on other sites More sharing options...
cnate777 Posted June 15, 2010 Author Report Share Posted June 15, 2010 I finally got to sling some 1/0 gauge rockford Fosgate power and ground wire...... Rockford Fosgate Sundown Audio DC Power Inc XS Autometer Pioneer Link to comment Share on other sites More sharing options...
mxman38 Posted June 16, 2010 Report Share Posted June 16, 2010 looking good and nice meeting you as well. the box will fit in the tbss however i need to make a false floor due to the wheel well. Link to comment Share on other sites More sharing options...
chevyman217 Posted June 16, 2010 Report Share Posted June 16, 2010 Build is coming along great!! p.s. don't mean to get superstitious or anything but you have 666 posts as of 7:20 p.m central time! lol Some people could care less about who the genius is that is making the product... They just want to get it cheap and say "derrrr, look at teh pretty lights in muh dash!" Because audio is a lifestyle not a hobby. Things that I am allergic too.... Haters Bitch Notes Link to comment Share on other sites More sharing options...
cnate777 Posted June 17, 2010 Author Report Share Posted June 17, 2010 Time is so short when you work 50-60 hours a week anyway as you can see I zip tied up the 1/0 5runs of power and 1 run of ground Rockford Fosgate Sundown Audio DC Power Inc XS Autometer Pioneer Link to comment Share on other sites More sharing options...
cnate777 Posted June 18, 2010 Author Report Share Posted June 18, 2010 Ok, so I got a bunch of goodies.....RCA's, fuses, 360.2's, amps, stickers, and speaker wire and a lot of it....Oh, did I mention RCA's.....So, I got the RCA's and the remote wire ran back to where the 360's will be and I put in the brand new carpet courtesy of Mike Anderson Chevy....if you need a car and you in the Chicagoland area then you need to buy it from Mike Anderson Chevy.....Batteries will be ordered tomorrow...like in the A.M. Rockford Fosgate Sundown Audio DC Power Inc XS Autometer Pioneer Link to comment Share on other sites More sharing options...
cnate777 Posted June 18, 2010 Author Report Share Posted June 18, 2010 Rockford Fosgate Sundown Audio DC Power Inc XS Autometer Pioneer Link to comment Share on other sites More sharing options...
cnate777 Posted June 20, 2010 Author Report Share Posted June 20, 2010 Came in early, I started to feel sick...not sure if was the heat or not but I got a little done.....Put some more Dynamat up......the B pillars got it half way....have to wait on the lower half until I get the speaker wire ran into each door.....C pillar on the driverside got done too.....mounted 2 of the relays....one for the 4 channel remote 12V switch and the other for the Autometer gauges that will be going in......Ran the power and ground as well as the amp temp gauge wires and the amp draw gauge wires.....need to get the heat shrink so i can start soldering everything....mounted the 4 channel 12volt switch as well...Made the secondary amp rack under the backseat......looks good and fits the space well.....as you can see both 360.2 are here and I am trying to figure out where they will be.......I also went up in the attic and got the T600.4 that I had not sure yet if it will come out and play in this build yet......Oh, I also have been telling you all that I have the 4 10" P3's well I forgot they are 12" P3 shallow mounts.....so they will be going in the doors......put the backseat back in obviously.....thats all I know..... Rockford Fosgate Sundown Audio DC Power Inc XS Autometer Pioneer Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.