djjerez702 Posted April 23, 2009 Report Posted April 23, 2009 ??? Quote 05 Ford F150- STOLEN!!!!4 AA Havocs 15s in a WALL4 Hifonics 2006ds1 kinetik 1800 in front4 kinetik 2400s n bakHifonics MaxxlinkAudiocontrol Epicenter2 runs 1/0 guage kicker hyperflexall other wires r knukonceptzTraded In05 Chevy SilveradoAscendant Audio 16 12s2 Mechman 320s1 Kinetik 1800 in front8 Kinetik 2400s n back4 2200 Audioques ampsLots of 0 gaugePioneer DeckAudio Control preampHifonics Maxxlink NOW 2012 Dodge Ram Hemi 4 Havoc 12s 2 AQ 2200s 2 Kinetik 2400s Pioneer Deck Audiocontrol Epicenter indash All Rockford 1/0 & every cable in there Jl audio xd 600/6 Rockford Fosgates Mids & highs Built By Audiotistics!
HeavyHitter Posted April 23, 2009 Report Posted April 23, 2009 ??? i first used dynamat, stuff is crazzy sticky and works well no regrets at all , i also used fatmat and i must say it was a huge waste of $...it worked well on the floor and doors however whenever it got above 80 deg. out the adhesive didnt work and it kept falling off, i finally got sick of it n took it out. I heard Hushmat was a good company buy i have never used it Quote
BrownRice Posted April 23, 2009 Report Posted April 23, 2009 (edited) i havnt used any yet, but i got some raamat bxt waiting to go into which ever car gets the biggest system lol anyone use it? Edited April 23, 2009 by BrownRice Quote
mexi909 Posted April 23, 2009 Report Posted April 23, 2009 i first used dynamat, stuff is crazzy sticky and works well no regrets at all , i also used fatmat and i must say it was a huge waste of $...it worked well on the floor and doors however whenever it got above 80 deg. out the adhesive didnt work and it kept falling off, i finally got sick of it n took it out. I heard Hushmat was a good company buy i have never used it i live in phoenix and its gets crazy hot i was plannin on gettng da fatmat extreme in 2 weeks so not recomended??? Quote
Neo_frog Posted April 23, 2009 Report Posted April 23, 2009 My first layer was Dynamat all over, then bought a shitload of Hushmat and covered everything again. I can't get my car to flex. It just breaks now. Quote Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/
mexi909 Posted April 23, 2009 Report Posted April 23, 2009 My first layer was Dynamat all over, then bought a shitload of Hushmat and covered everything again. I can't get my car to flex. It just breaks now. so if you on a budget wats da way to go??? Quote
HeavyHitter Posted April 23, 2009 Report Posted April 23, 2009 i live in phoenix and its gets crazy hot i was plannin on gettng da fatmat extreme in 2 weeks so not recomended??? If your going to put it on the roof, save yourself a headache and dont use..if your using on the doors and floor it works well. Me and my friend baught a bulk pack of it and the same happend to the both of us..our head liner was sagging 2 inches b/c it fell off the roof n was just sitting ontop of the head liner. Quote
mexi909 Posted April 23, 2009 Report Posted April 23, 2009 If your going to put it on the roof, save yourself a headache and dont use..if your using on the doors and floor it works well. Me and my friend baught a bulk pack of it and the same happend to the both of us..our head liner was sagging 2 inches b/c it fell off the roof n was just sitting ontop of the head liner. daaaammmm Quote
wL<3bass Posted April 23, 2009 Report Posted April 23, 2009 I have installed 2 rolls of Raammat BXT60 (over 120sqft) and I'll never touch another deadener again besides this one....talk about sticky.....once its on there its on....to get it off I hope you have a putty knife a heat gun some gloves and possibly vice grips....seriously. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
Neo_frog Posted April 23, 2009 Report Posted April 23, 2009 If your going to put it on the roof, save yourself a headache and dont use..if your using on the doors and floor it works well. Me and my friend baught a bulk pack of it and the same happend to the both of us..our head liner was sagging 2 inches b/c it fell off the roof n was just sitting ontop of the head liner. You weren't using good stuff then. I have two layers on my roof, then drove around for a couple months with no headliner and it never came off. Quote Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.