bluethunder Posted May 29, 2009 Report Share Posted May 29, 2009 so just ordered some dc level 3 15's. they will be running off the fosgate t1001bd at 1 ohm.my question is what size box and how big of a port. i was looking at about 7.2 cu ft after displacement with a port 6 by 20 tuned to 32hz with a length of 34 inches. tell me what yall think and any suggestions are greatly apreciated Link to comment Share on other sites More sharing options...
Crump Posted May 29, 2009 Report Share Posted May 29, 2009 so just ordered some dc level 3 15's. they will be running off the fosgate t1001bd at 1 ohm.my question is what size box and how big of a port. i was looking at about 7.2 cu ft after displacement with a port 6 by 20 tuned to 32hz with a length of 34 inches. tell me what yall think and any suggestions are greatly apreciated Thats fine but i would go 8 cubes. and whats the square inches of the port? you want 12-16 square inches per cube Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
AI James Posted May 29, 2009 Report Share Posted May 29, 2009 7 i good port area is to much imo Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.