siucsaluki11 Posted June 11, 2009 Report Share Posted June 11, 2009 (edited) http://www.stevemeadedesigns.com/board/ind...c=40479&hl= enter that into the address bar. or search the forum for this topic Enclosure Designing: Tutorial, free enclosure design you can do yourself Edited June 11, 2009 by siucsaluki11 Quote woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
siucsaluki11 Posted June 11, 2009 Report Share Posted June 11, 2009 i just bumped it for ya Quote woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
Torres Posted June 11, 2009 Report Share Posted June 11, 2009 it's really pretty easy. you make a rectangle, and push/pull it up .75". on each side, you draw a line that is .75" from the edge. the push/pull each wall to the desired height. then draw a vertical rectangle on the very edge of one wall, then push/pull it across the whole box. then you got yourself a sealed box. same type deal when doing the ports and sub cutouts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.