sierra mist Posted March 21, 2007 Report Posted March 21, 2007 Here are the T/S Parameters for the MKIII *Power handling: 800 watts RMS/1,100 watts max *VCdia: 2-1/2" *Le: 3.84 mH *Impedance: 4 ohms *Re: 3.68 ohms *Frequency range: 19-500 Hz *Magnet weight: 136oz. *Fs: 19.93 Hz *SPL: 91.7 dB 2.83V/1m *Vas: 7.79 cu. ft. *Qms: 5.89 *Qes: .41 *Qts: .38 *Xmax: 20.5 mm *Dimensions: Overall Diameter: 15-9/16", Cutout Diameter: 14-1/16", Mounting Depth: 8-3/8". Here are the ones for the SSD DUAL 1 | DUAL 2 Fs: 25.9 Hz | 25.3 Hz Re: 0.75 Ohms/coil | 1.5 Ohms/coil Qms: 4.78 | 4.89 Qes: .65 | ..58 Qts: .57 | .52 Mms: 246g | 258g Cms: 0.15mm/N | 0.15mm/N Sd: 810cm^2 | 810cm^2 Vas: 141.3 l | 141.3 l Spl: 87.6dB 1W/1m | 87.8dB 1W/1m Bl: 9.3 N/A | 00.0 N/A Xmax: 21mm Rms: 800W Sealed box: N/A cuft Ported box: 3-4 cuft @ 33Hz Sub OD: 15.625” Cut ID: 14.125” Mounting depth: 8.000” Displacement: 0.17cuft The only thing that sticks out to me is the MKIII is 4 ohm. I have used the 10" MKIII and it got low in a small sealed box. I just don't know how it will do ported. I'm at work so I don't have time to crunch all the numbers. I'd like to have the sub ordered so I can have it for my install next week. Any suggestions? Quote
Kicker Guy Posted March 21, 2007 Report Posted March 21, 2007 Either one would be a good choice, but I would have to go with the SSD Quote Head Unit: Pioneer DEH-P6000UB Sub Amp:American Bass VFL 500.1 Subs: 4 Fi BL 18's Enclosure:21.5 Cubic foot flat wall tuned to 40 hz Batteries: 3 Kinetik 2400's in the back, Kinetik 1200 under hood. Mids & Highs: 4 Kicker DS 6.5 coax in doors, 2 Kicker DS coax in pillars Highs Amp: Kicker kx250.2, kx100.2 Wire: 4 Runs 1/0 gauge Knukonceptz
sierra mist Posted March 21, 2007 Author Report Posted March 21, 2007 Either one would be a good choice, but I would have to go with the SSDYeah, but there is no way I will have it for my install next week. Quote
Kicker Guy Posted March 21, 2007 Report Posted March 21, 2007 somethings are worth waiting for Quote Head Unit: Pioneer DEH-P6000UB Sub Amp:American Bass VFL 500.1 Subs: 4 Fi BL 18's Enclosure:21.5 Cubic foot flat wall tuned to 40 hz Batteries: 3 Kinetik 2400's in the back, Kinetik 1200 under hood. Mids & Highs: 4 Kicker DS 6.5 coax in doors, 2 Kicker DS coax in pillars Highs Amp: Kicker kx250.2, kx100.2 Wire: 4 Runs 1/0 gauge Knukonceptz
sierra mist Posted March 21, 2007 Author Report Posted March 21, 2007 Ok, I just didn't want to wait Quote
sierra mist Posted March 21, 2007 Author Report Posted March 21, 2007 The MKIII has a Vas of 7.79 ft^3 but the SSD has a Vas of 141.3. Is that cubic feet or what? Trying to run a comparison on subwoofertools.com Quote
sean 371 Posted March 21, 2007 Report Posted March 21, 2007 141.3 is liters. Quote A couple links to some box builds: Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI, Mini-Bump, Hummer H2, Ford F-150 My own car builds (current setup --- under construction): Overall Thread, Kickpods, Dash, Back Doors Subwoofer Wall
sierra mist Posted March 21, 2007 Author Report Posted March 21, 2007 141.3 is liters. Thanks for clearing that up. That helps a lot. Quote
sierra mist Posted March 21, 2007 Author Report Posted March 21, 2007 I really don't see much of a difference outside of ohm load Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.