I'm looking for H.I.D.'s for my Chevy Tahoe foglights...Where?

[ZombieswithMustaches]

I've got the 8000k headlights coming. So, I'm thinking about getting some for the foglights. And then my next question is, how do I wire up the foglights to stay on with the headlights??

jason

p.s. I've been doing some changes to the Tahoe. As soon as the exterior is done, I'll reveal it.

[tacomabanga1986]

ied wire my foglights in with the parking lights, thats how i do it sometimes, so when the parking lights are on there on, so there kinda like driveing lights, n then turn on headlights?

but u can wire off the pos low beam wire n they will stay on all the time, are u gettin 8000k h/l or just low beams? i can make it work but i dont kno exactly how to type it out on how to do so, but its acually easy to do, my regular headlight wires had enulf currnet flowing so i didn't need the whole ballast treatment for my hids, and

www.futurevisionhid.com is a good place, and alot cheaper than what i payed for mine, n there part of smd so that makes it all the better

hope this helps

[meade916]

use a relay bro from the headlight wire......its easy.

oh no, any minute the fuc#king HID police, aka Stephen is gonna give you his 2 cents - i can feel it coming.

[meade916]

my regular headlight wires had enulf currnet flowing so i didn't need the whole ballast treatment for my hids, and

hope this helps

ummm if you dont have a ballast then you dont have HID's. You cant just hook up an HID bulb to 12vDC like a halogen and have it work. They dont work that way.....maybe i am misreading what you are trying to say.

[meade916]

i just looked at some of your pics, i see a ballast......so im sure i misread what you were sayin' or you didnt express what you were tryin to say very good.

[tacomabanga1986]

http://www.futurevisionhid.com/fog-light-k...c-35_48_43.html

and i didn't mean balast, i ment the relay deal, from headlight harnes to relay switch to battery 12v n what knot, mine just has prongs thats wired to a plug that goes into ballast, guy said mine were good enulf to power the ballasts without the relay harness, so it worked out for the better, but still yet i gave $200 for my hids n fvh are alot cheaper n better quality seems like products

[meade916]

thats what i figured....

anyway for wiring in fogs to turn on when the headlights turn on, definitly use a relay.

[tacomabanga1986]

but ya u can wire it threw a relay setup, its pritty simple, why steve said a relay cause its a lil more leanient on the power u get than just tapping str8 into the headlight wireing, just run a pos wire from battery to relay, either a highbeam, or low beam pos wire from headlight wireing, or just tap into the relay harness that comes with ur hids to turn on the ballasts, n then just wire that into other relay n ur set

i wished i knew how to type it out as to show it in person, but its almost as simple as installing regular hids, just a little rewireing diff stuff but still works, and make sure u heatshrink the wire cause electrical tape comes off with road grime n what knot, but other than that good luck with ur truck man

[tacomabanga1986]

this should be sufficient for wireing this

http://www.parts-express.com/pe/showdetl.c...tnumber=330-073

http://www.parts-express.com/pe/showdetl.c...tnumber=330-074

and if u need it

http://www.parts-express.com/pe/showdetl.c...tnumber=500-001

if u dont want to tap into the hids relays wireing u can go this route, n get all u need for around $5

[ZombieswithMustaches]

Thanks guys. Always appreciated. I'm gonna order the H.I.D.s for the foglights probably early next week. Will they work with the factory foglights I have on my LS or do I need to upgrade? What kind of bulb should I be getting??

And Steve, when am I coming out to do some tattoo work and get those 24's from ya???