amariga09 Posted July 1, 2009 Report Posted July 1, 2009 when setting mids and highs gains do you set your cd player/eq to a flat position or can you leave the settings at a custom level???
capalass23 Posted July 1, 2009 Report Posted July 1, 2009 just turn every thign up lol 95 WAGON BUILD FEED BACK
amariga09 Posted July 1, 2009 Author Report Posted July 1, 2009 just turn every thign up lol Ha ... i'm being serious
sodfamily Posted July 1, 2009 Report Posted July 1, 2009 Take a cruise over to the amplifier section, there is some info on this subject there... or use the search function... Head Unit: Alpine CDA 9887 Sub Amps: 4 RF2500's Subs: 8 SA-12's Walled Comp Amp: 1 RF600.2 (for now) Comps: (4) 6.5 Punch Mid Pros and 2 Punch Pro Tweeters Batteries: (1) XS D5100 (5) D3100 Power Cables: 2 runs of 2/0 power and ground each front to back(Try-Star) Alternator: Dual Mechman Rhino 250's Deadener: Fatmat / Damplifier Pro
SQMonte Posted July 1, 2009 Report Posted July 1, 2009 put everything flat Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f
shainemcconnell Posted July 1, 2009 Report Posted July 1, 2009 2 options, put everything on flat man and leave them there or raise everything to max ( if the HU is still putting out a nonclipping output) and set the gain and after that put everything back to flat, and that way you can adjust the settings on the HU and not worry about over driving the amp. for both use a DMM to set the ac outputs with a 1k test tone 2010 IDBL Rookie 1 North American Champion 2009 IDBL Rookie 1 Fl State Champion 2009 EBB Fly Weight 3rd Place Fl State Finals 2006 Silver Grand Prix GXP :Diablo Audio Hellfire 1000.1, JL Audio 300/4, One 13W7, ZR650, VR690, JL Cleansweep setup. Team Pure Pressure
Recommended Posts
Archived
This topic is now archived and is closed to further replies.