swervinburban Posted September 15, 2009 Author Report Posted September 15, 2009 orrrrr you can do 4 9512s just an idea an have plenty of room I know it did cross my mind to drop down to 12's but it would be expensive as fuck to buy two more subs and all the amps and batteries to power them. Cause im still going to run Lunar amps and that means 8 more amps. which = mucho $$$$$$ hey do you have measurements for the big 3 for wiring ? figured id ask you my truck isnt here yet coming back from ca to ga need the measurements to buy some wiring I'll be able to get those measurements for you in the morning I just locked my keys in the truck and im getting a spare key brought over in the morning. I'll shoot you a pm and let you know the measurements Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed)
swervinburban Posted September 15, 2009 Author Report Posted September 15, 2009 here's a few pics of pics of the spiders you can see how the heat fried them up if you look hard on these you can see where the coil started unwinding coils nice and black Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed)
Kasey Posted September 18, 2009 Report Posted September 18, 2009 Holy crap "Audio is not a hobby it's a lifestyle" _____________________________Refs_1_Refs_2_____________________________
96 Tacoma Posted September 18, 2009 Report Posted September 18, 2009 damn dude where u located id love to see this 03 Ram 1500 3.7 v6 quad cab H/U: Pioneer 4200UB Subs: 4 DC LVL 4 15s D1 Sub Amp: 2 Crescendo 3kwp strapped Highs Amp: Crossfire xp240.2 Highs: Crossfire 2 rs69, 2 rs52 Alt: DC POWER ALT 270XP Batts: 5 sprinter data safe Big 3 0ga New Truck 03 Ram Build Log 6 DC Audio lvl2 15's My Wrecked 99 Dodge Ram Sport Build Log 02 Ranger X Cab Build 02 Ranger Build 2 http://www.dcsoundlab.com/ My linkhttp://www.crescendoaudio.com http://www.dcpowerinc.com/ http://www.crossfirecaraudio.com/ Youtube Vids
swervinburban Posted September 19, 2009 Author Report Posted September 19, 2009 damn dude where u located id love to see this I'm located in opelousas Louisiana. Where are you located?? Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed)
96 Tacoma Posted September 19, 2009 Report Posted September 19, 2009 too far away in mandeville 03 Ram 1500 3.7 v6 quad cab H/U: Pioneer 4200UB Subs: 4 DC LVL 4 15s D1 Sub Amp: 2 Crescendo 3kwp strapped Highs Amp: Crossfire xp240.2 Highs: Crossfire 2 rs69, 2 rs52 Alt: DC POWER ALT 270XP Batts: 5 sprinter data safe Big 3 0ga New Truck 03 Ram Build Log 6 DC Audio lvl2 15's My Wrecked 99 Dodge Ram Sport Build Log 02 Ranger X Cab Build 02 Ranger Build 2 http://www.dcsoundlab.com/ My linkhttp://www.crescendoaudio.com http://www.dcpowerinc.com/ http://www.crossfirecaraudio.com/ Youtube Vids
Sanitarium Posted September 19, 2009 Report Posted September 19, 2009 Thanks man I appreciate it but heres the ploblem I been facing it a small truck so the box can only be 16" tall so I would have to have the baffels angled from top to bottom which wouldn't be to big of a problem if I run 2 subs, but I want to run 3. So here's the next problem I have the width between fender welds is like 40" which means 2 of the 3 would have to be on an angle from top to bottom and from side to side aswell. Do you think you can help me out with any advise. I could build around the fender welds which would give me a width of 48" but the fender welds are only 12" after the rear wall, which really wouldn't give me that much room except for the face of the box. I hope what I just said made sence.I'll throw some numbers around next time i'm off if i remember and see what i can come up with for ya.
swervinburban Posted September 19, 2009 Author Report Posted September 19, 2009 I'll throw some numbers around next time i'm off if i remember and see what i can come up with for ya. thanks man I appreciate it Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed)
onlyinajeep Posted September 19, 2009 Report Posted September 19, 2009 just get a pwk design he defetinally knows his shit wit the band passes its is worth the 50 bucks just so you dont have to waist the wood trying to get the band pass right if you gotta send them in to dd have the switch them over to 12s that way you can stand them up just ask steve (at dd) he will tell you the same or you can email him on pwk's forum he is super steve he will get back to you i had 2 solo xs in a 6th i loved it played flat from 20hz to 80hz with a lil peek at 51 if done right the 6s wont unload help cancle out distortion are you going to siknik, i wanna here it TEAM PURE Team South http://www.stevemeadedesigns.com/board/topic/195192-8-pure-audio-15-flat-wall-chevy-crewcab-dually-vid-page-4-s/
swervinburban Posted September 19, 2009 Author Report Posted September 19, 2009 just get a pwk design he defetinally knows his shit wit the band passes its is worth the 50 bucks just so you dont have to waist the wood trying to get the band pass right if you gotta send them in to dd have the switch them over to 12s that way you can stand them up just ask steve (at dd) he will tell you the same or you can email him on pwk's forum he is super steve he will get back to you i had 2 solo xs in a 6th i loved it played flat from 20hz to 80hz with a lil peek at 51 if done right the 6s wont unload help cancle out distortion are you going to siknik, i wanna here it thanks man I probly shoot out a couple email and see what pwk has to offer. And I will most definantly be at siknik but I will be running the wall then just to make sure I will be playing at the show. I will start the new box after siknik. Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.