Jump to content
 
 

Recommended Posts

K, I wanted to tune my L5's lower for a lil more clean deep bass instead of just gnarly loudness. They were at 39, now I think it's between 30-32...I forget where I put it. And I wanted a flushed amp rack, but I decided on that after I started cutting wood. But you'll see. :)

Anyway here's pics.

These will be for mounting the flush mounting frame over the amps: (more of these later)

Posted Image

Box starting to come together:

Posted Image

Then a brad nail decided it wanted to come out of the wood and punch straight through my finger...I can see the mark on my fingernail from where it came up under it.

Posted Image

But couldn't stop building over some little flesh wound:

Posted Image

Posted Image

Posted Image

Posted Image

Resined 45 in port. Ran out of resin for the rest of it.

Posted Image

Posted Image

as usual, comments/opinions are welcome. you guys know the drill. B)

Edited by sean 371

A couple links to some box builds:

Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI,

Mini-Bump, Hummer H2, Ford F-150

My own car builds (current setup --- under construction):

Overall Thread, Kickpods, Dash, Back Doors

Subwoofer Wall

Share this post


Link to post
Share on other sites

box looks awsome dude. I know who im nominating for April.


System Specs:

Alpine SWR-1542D 15" sub

Sealed Subwoofer Box

MTX mxa 6001 Class D 774watts RMS @ 2ohms

MTX Bass Knob

Pioneer 6.5's in doors

MTX Thunderdome 6x9 in rear

Stinger 1 Farad capacitor

80 amp stinger fuse

BIG 3 in 4 gauge wire

4 gauge power/ground wire

JVC MP3 CD Car Deck (KD-G320)

12 gauge Monster speaker wire to Sub

16 gauge Stinger speaker wire to doors

Stinger Gold Plated Battery Terminals

Share this post


Link to post
Share on other sites

It's got 74 square inches of port. And the box is somewhere around 5.5 cubic feet. I don't think it'll be an issue, especially when you consider that steves has only 120" for 4 18's.

Thanks nismo

And thanks civic, that means a lot :)

and yea that nail hurt like a bitch. It was bleeding all down my hand but the camera died before i could get a shot of it. haha

Edited by sean 371

A couple links to some box builds:

Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI,

Mini-Bump, Hummer H2, Ford F-150

My own car builds (current setup --- under construction):

Overall Thread, Kickpods, Dash, Back Doors

Subwoofer Wall

Share this post


Link to post
Share on other sites

Yea the flush mount is gonna go quick, I just have to get the box finished so I can start nailing the frame for it. I still need to find $70 for sound deadening too.


A couple links to some box builds:

Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI,

Mini-Bump, Hummer H2, Ford F-150

My own car builds (current setup --- under construction):

Overall Thread, Kickpods, Dash, Back Doors

Subwoofer Wall

Share this post


Link to post
Share on other sites

I did some more work on the amp rack, had to stop cause it's too late to saw anymore. I'm just mounting the framework that the cover will go on. I'll do 4 or more nutserts around this framework for the cover to screw onto.

Posted Image

Posted Image

Edited by sean 371

A couple links to some box builds:

Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI,

Mini-Bump, Hummer H2, Ford F-150

My own car builds (current setup --- under construction):

Overall Thread, Kickpods, Dash, Back Doors

Subwoofer Wall

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...