Jump to content

Recone parts- coils, spiders, etc


Recommended Posts

Posted

I have collected many MANY coils over the last 6 months, I would say about 600- 800pcs, and about 600 or so spiders. Only problem is, there is like 10 of these, 20 of those, 200 of these, and 5 of these. So, Iam looking to down size a little bit with the boxes of coils

If you have special spider needs let me know, I have spiders from 1.5" all the way to 6" - no 5"

leaded, and un leaded

let me know what your working on, pictures, etc, and I will see what I have for you.

Will also be selling recone glue here in a few weeks, and will be selling by the 1 oz, and 4oz bottle

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Spiders rang from 1.5"coil 4.5" OD to 4" ID to 12" OD

sundown.jpg
I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
Posted

Hey I got a rd hw 15 that needs a recone you got anything that will fit? I'll take measurements later tonite if you don't know off the top of your head

Roseville, CA

Posted

Hey I got a rd hw 15 that needs a recone you got anything that will fit? I'll take measurements later tonite if you don't know off the top of your head

Your local, bring the woofer by, and we will see what fits

;-)

sundown.jpg
I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
Posted

Morning bump....

sundown.jpg
I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
Posted

I have collected many MANY coils over the last 6 months, I would say about 600- 800pcs, and about 600 or so spiders. Only problem is, there is like 10 of these, 20 of those, 200 of these, and 5 of these. So, Iam looking to down size a little bit with the boxes of coils

If you have special spider needs let me know, I have spiders from 1.5" all the way to 6" - no 5"

leaded, and un leaded

let me know what your working on, pictures, etc, and I will see what I have for you.

Will also be selling recone glue here in a few weeks, and will be selling by the 1 oz, and 4oz bottle

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Spiders rang from 1.5"coil 4.5" OD to 4" ID to 12" OD

got anything that will fit a rockford fosgate trf2215

audio fanatic

Posted

got anything that will fit a rockford fosgate trf2215

I have the coils- the 4" coils that Cactus redesigned for the TRF( which are hard to find- and expensive usually), I have the spiders, and cones- so I got parts for full recone kits on TRFs

sundown.jpg
I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
Posted

No JL parts Skull, mainly SPL parts here, and some 2" and 2.5" coils and spiders that are pretty specific to large gap motors...

Alpine, of course man

Are these the olddddd blueprint motors, or the design after that?- (4 spoke frame or 12 spoke frame)

I have all the parts for the SFX subs, minus the domes

coils from dual 0.5ohm, 0.9 dual, 1 dual, quad 1, quad 2,, short coils for higher Fs, or longer coils for lower Fs

Posted Image

^ old style blue print motor with the 1.5" or 1.25" top plate- under hung design

The other style has a bumped back plate, and a half inch top plate

sundown.jpg
I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
Posted

I have the coils- the 4" coils that Cactus redesigned for the TRF( which are hard to find- and expensive usually), I have the spiders, and cones- so I got parts for full recone kits on TRFs

Really? Well why were my baskets changed again?

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1956 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...