L 7 squared! Posted August 12, 2009 Report Share Posted August 12, 2009 Not sure if this is an old thread but I have two zx1000.1 's now and i need to know if i can wire both of them from one set of rca's.And is there such a thing as a remote gain splitter for two amps? Sorry for such a newb ? but i dont want to F anything up. Also have a zx350.4 that I intend on wiring to the doors. I have never ran more than one amp in a setup before so this is all new to me.Any info helps thanks. 2x Kicker L 7 15's 2x Rockford Fosgate p 1653's 1x dual center slot ported 5.25cubes tuned 48hz music box 2x Kicker zx1000.1 D's 1x Kicker zx350.4 Remote gains 1x kinetik hc800 1x Kicker 0 guage Sony hu Stock alt : ( A hobby turned into obssession ! Link to comment Share on other sites More sharing options...
CLNFREAK Posted August 12, 2009 Report Share Posted August 12, 2009 Not sure if this is an old thread but I have two zx1000.1 's now and i need to know if i can wire both of them from one set of rca's.And is there such a thing as a remote gain splitter for two amps? Sorry for such a newb ? but i dont want to F anything up. Also have a zx350.4 that I intend on wiring to the doors. I have never ran more than one amp in a setup before so this is all new to me.Any info helps thanks. ye you can run two amps off one set of rca's, the speakers off of the amps will be off the same channel(example: front rca to two four channel amps you would have 8 front channels) I dont think this would be an issue for a mono sub channel but in a sterreo aplacation might sound funny if one or more sets of speakers are not in the corect location (front to back or back to front ). you can run the rca's thru a signal processor to seperate the channels (how stuff works ) this is how I see it (not sayin I am right, feel free to correct me if I am wrong) Link to comment Share on other sites More sharing options...
loburbon Posted August 12, 2009 Report Share Posted August 12, 2009 how many rca out puts does your deck have 2000 gmc yukon 4 sundown Zv3 15's 4 dd m2a's kenwood kdc-x994 2 batcap 4000's 1 batcap 2000 dual alts. 154@37hz and climbing http://www.cardomain.com/ride/3231683 http://www.myspace.com/torque150 Link to comment Share on other sites More sharing options...
Andrew2944r Posted August 12, 2009 Report Share Posted August 12, 2009 A Maxxlink from would take care of your issue Team Ampere Audio Link to comment Share on other sites More sharing options...
L 7 squared! Posted August 12, 2009 Author Report Share Posted August 12, 2009 I think it has 3 total.? I'll have to look again. This is what I'm tryin to do.... one zx1000.1 to one L 7 15 and one to the other. So each sub will have its own amp. I'm gettin a deal on this other amp so I said why the HLL not right mo powa is better!! 2x Kicker L 7 15's 2x Rockford Fosgate p 1653's 1x dual center slot ported 5.25cubes tuned 48hz music box 2x Kicker zx1000.1 D's 1x Kicker zx350.4 Remote gains 1x kinetik hc800 1x Kicker 0 guage Sony hu Stock alt : ( A hobby turned into obssession ! Link to comment Share on other sites More sharing options...
enemyofsilence Posted August 12, 2009 Report Share Posted August 12, 2009 maxxlink would be good but you can also try y splitters for the cheaper route. scottie (scottiej) is selling some here. Team Bass-Hz Link to comment Share on other sites More sharing options...
B4SSB0Y Posted August 12, 2009 Report Share Posted August 12, 2009 ^ Get some of those, thats what I used to use when I ran dual sub amps. Also another thought if your amp has input and output rca's you can just connect the RCA from your HU to amp 1, and rca's from amp 1 to amp 2, thats the way I'm running my setup now. as far as a remote gain splitter I do belive you can use a phone splitter for that, all the cord for a remote gain is phone line anyhow. Can someone else verify that works? Car - 99 Neon Sport Batt - 1 Redtop up front On 200A Excessive Amperage alt Sub - 2 12" Kicker L7's in ~2 cuft @ 36hz each on a Xtant X1001 @ 1 ohm Front Highs/Mids - JVC CS-FS6 and Infinity 6022i on Xtant A2002 Rear Highs/Mids - None HU - Pioneer DEH-P8600MP 1/0 wire ran thru entire car aswell as big3 DB - 144.5 @ Dash. Link to comment Share on other sites More sharing options...
enemyofsilence Posted August 12, 2009 Report Share Posted August 12, 2009 yea to follow up what B4SSBOY said, use a splitter to the rca coming out of the hu. use one for your mid/high amp and use the other for the sub amp. then use the output/input connections on your sub amps and connect them to eachother. just to clarify... Team Bass-Hz Link to comment Share on other sites More sharing options...
B4SSB0Y Posted August 12, 2009 Report Share Posted August 12, 2009 Actually I didnt mean like that, I meant split the sub channel to the two sub amps. For your mids/highs I would run another 1 or 2 sets of RCA's depending on if your running a 2/4 channel amp. I have 4 amps in my car but only using 3 sets of rca's by doing it this way. Car - 99 Neon Sport Batt - 1 Redtop up front On 200A Excessive Amperage alt Sub - 2 12" Kicker L7's in ~2 cuft @ 36hz each on a Xtant X1001 @ 1 ohm Front Highs/Mids - JVC CS-FS6 and Infinity 6022i on Xtant A2002 Rear Highs/Mids - None HU - Pioneer DEH-P8600MP 1/0 wire ran thru entire car aswell as big3 DB - 144.5 @ Dash. Link to comment Share on other sites More sharing options...
Austin175 Posted August 12, 2009 Report Share Posted August 12, 2009 well my hu has a front rear an subwoofer out put so i would just use three sets of rcas one to each right kia spectra 4 door HU-a kenwood kdc-692x optima red top under the hood ( kinetik battery or powermaster in the back ) Iraggi 260amp H/O alternator 1 set of knu kandy 1/0 guage wiring kit ( 2 more sets coming ) front speakers - back speakers - 2 12" lv 4's with lvl 5 softparts ( going to be 4 in near future) Sundown 3500d( going to be 2 sometime ) i have boughten from - Bass14(smd), ddbump(caraudioclassifieds) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.