Beanz Posted August 16, 2009 Report Share Posted August 16, 2009 all right so i got this box design that i got from drew and i was wondering is there anyway to brace the box.will this tune my box higher?i wanted to use all thread but what sixe do i use?and i wanna do to about 10 sqin but will this change the box anyhow? Quote That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
LoudBimmer Posted August 16, 2009 Report Share Posted August 16, 2009 how big are subs? Quote Link to comment Share on other sites More sharing options...
Beanz Posted August 17, 2009 Author Report Share Posted August 17, 2009 12 inch subs goin to be kove armagedons. but im wanting for this for like a box to last me so like say i throw major power to them it wont flex.but say i fiberglass the inside will i still need to brace the box? Quote That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
doug118 Posted August 17, 2009 Report Share Posted August 17, 2009 (edited) since the front of the box is only 15" tall I'd take a guess and say 12's edit: I type slow Edited August 17, 2009 by doug118 Quote 2001 Tahoe. Huge front stage and 55+ substage http://www.stevemeadedesigns.com/board/topic/196418-another-tahoe-build-huge-front-stage-and-155-substage/ Link to comment Share on other sites More sharing options...
LoudBimmer Posted August 17, 2009 Report Share Posted August 17, 2009 well, to be honest i dont know anything about boxes or sub, but trying to learn good luck on box , looking really good so far Quote Link to comment Share on other sites More sharing options...
zfrerichs Posted August 17, 2009 Report Share Posted August 17, 2009 i would still throw a piece of 1/2 all thread in there from baffle back after glassing the inside you can use 3/4 all thread a little over kill but nothing wrong with that Quote Roseville, CA Link to comment Share on other sites More sharing options...
ben29555 Posted August 17, 2009 Report Share Posted August 17, 2009 (edited) im unsure how much it would change it but if you wanted to be safe tune 1 or 2hz lower then you want the tuning at Edited August 17, 2009 by ben29555 Quote My Build Log loud bass songs Link to comment Share on other sites More sharing options...
Beanz Posted August 17, 2009 Author Report Share Posted August 17, 2009 i would still throw a piece of 1/2 all thread in there from baffle back after glassing the inside you can use 3/4 all thread a little over kill but nothing wrong with that so would doin this would i be safe forl ike say 4000 rms lol.i wanna keep this box for a while.but how would i put the all thread in there with glue? Quote That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
zfrerichs Posted August 17, 2009 Report Share Posted August 17, 2009 what do mean after glue? make you box like you normally would then drill two holes for the allthread to go through then put a washer and a nut on both sides and tighten not too hard Quote Roseville, CA Link to comment Share on other sites More sharing options...
Beanz Posted August 17, 2009 Author Report Share Posted August 17, 2009 oh okay then i got you then i just thought something different.but i know where to put it on the front but waht about the sides?sorry but im kind of new to the build boxes game and ima build my first box maybe tomorrow.picked up sum birch too.jsut didnt knwo what size to use for all thread Quote That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.