Cr@sh Posted August 17, 2009 Report Share Posted August 17, 2009 And I should probably mention, I am not trying to make an spl vehicle for competitions, I just want a real loud daily driver. Im not a COMPLETE noob I know im not going to be winning competitions with Jl w3 subs,(i know it could be possible). If this box turns out the way I hope it will I will probably attend 1 local competition just so i can put it to the test on the TL I really am just more curious than anything of what sort of number I can put up. Ive seen everyone on here posting their scores, and there pretty impressive I have never heard anything louder than my own system so i am deprived. I just want to know to give me a better idea of how crazy the scores all you real competitors are puttin up. With a total of 1200 watts in the configuration your speaking of (4-12"s in a mono chamber/ Ported enclosure) I would imagine 138-140 range. Quote My old install at cardomain, never finished! Link to comment Share on other sites More sharing options...
Jared420 Posted August 17, 2009 Author Report Share Posted August 17, 2009 With a total of 1200 watts in the configuration your speaking of (4-12"s in a mono chamber/ Ported enclosure) I would imagine 138-140 range. Thats pretty cool Im hoping for at least a 135 so that makes me happyThe amp is underrated a little bit @14.4v It does 1470 rms but after a few minutes its back and forth around 13.4-14 and when its really charging good it stays between 13.8 and 14.4 but most of the time its just under 14. Quote 2012 silverado ext cab ltz 24" kmc rims AudioQue 2200 Pioneer AppRadio Alpine mrx f35 4 channel Bose mids and highs Iraggi Alt + stock alt in a DC power dual alternator kit Yellowtop+stock under hood 0 gauge Knu wire Big 3 4 gauge stinger (4 chan wiring) 3 DC 10'' LVL3 with LVL4 parts Link to comment Share on other sites More sharing options...
Cr@sh Posted August 17, 2009 Report Share Posted August 17, 2009 Well then, get your build on! Quote My old install at cardomain, never finished! Link to comment Share on other sites More sharing options...
98crewcab Posted August 17, 2009 Report Share Posted August 17, 2009 Thats pretty cool Im hoping for at least a 135 so that makes me happyThe amp is underrated a little bit @14.4v It does 1470 rms but after a few minutes its back and forth around 13.4-14 and when its really charging good it stays between 13.8 and 14.4 but most of the time its just under 14. how about a blowthrough under your tool box? could get a bigger enclosure, ported for more spl, and still have your seating capacity. I am currently running 4 12's and didnt have to move any of my seats, up, back or forward. barely takes any space in my bed as well. Quote 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk! Link to comment Share on other sites More sharing options...
tibs Posted August 17, 2009 Report Share Posted August 17, 2009 he is trying to save the value of the truck... you know your truck wont lose value if you take the seat out cause you can put it back in. Quote Tibs 99 F-150 Build 8 twelves 8 - Re SE 12"s 2 - SunDown Audio Saz-3000d's 1 - vx4004 planet audio amp big 3 1/0 gauge MECHMAN 250 amp alt MySpace Link to comment Share on other sites More sharing options...
Jared420 Posted August 17, 2009 Author Report Share Posted August 17, 2009 he is trying to save the value of the truck...you know your truck wont lose value if you take the seat out cause you can put it back in. Oh yea I know that I just like being able to have passengers. Quote 2012 silverado ext cab ltz 24" kmc rims AudioQue 2200 Pioneer AppRadio Alpine mrx f35 4 channel Bose mids and highs Iraggi Alt + stock alt in a DC power dual alternator kit Yellowtop+stock under hood 0 gauge Knu wire Big 3 4 gauge stinger (4 chan wiring) 3 DC 10'' LVL3 with LVL4 parts Link to comment Share on other sites More sharing options...
98crewcab Posted August 17, 2009 Report Share Posted August 17, 2009 Never understood that whole "will lose value thing" Ive always bought something because I WANTED IT, not because I planned to sell it later. oh well, to each his own..... Quote 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk! Link to comment Share on other sites More sharing options...
Cr@sh Posted August 18, 2009 Report Share Posted August 18, 2009 Is it built yet? lol Quote My old install at cardomain, never finished! Link to comment Share on other sites More sharing options...
Jared420 Posted August 18, 2009 Author Report Share Posted August 18, 2009 Is it built yet? lol haha nope i wish Im just waitin to hear back on what hes plannin to do he told me a couple days ago he was gonna throw a few sketches together to decide what he wanted to do Quote 2012 silverado ext cab ltz 24" kmc rims AudioQue 2200 Pioneer AppRadio Alpine mrx f35 4 channel Bose mids and highs Iraggi Alt + stock alt in a DC power dual alternator kit Yellowtop+stock under hood 0 gauge Knu wire Big 3 4 gauge stinger (4 chan wiring) 3 DC 10'' LVL3 with LVL4 parts Link to comment Share on other sites More sharing options...
Cr@sh Posted August 18, 2009 Report Share Posted August 18, 2009 I tried to throw one together today from work but sketchup 7 wouldnt work after I installed it. I'll try again tomorrow Quote My old install at cardomain, never finished! Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.