tibs

as long as it cuts and does it right. i dont care what i call it..

this one looks much different. http://wheelsnparts.com/product_info.php/products_id/661

i already wanted 1/2" everything. only thing im not sure about is cups for the front. i have a 99 f150 bolt in cups for my truck. http://www.theslamstore.com/product_p/fc-150.htm i dont know the height of the cups i need.

i was thinking the same thing. i just remember read that somewhere.. i cant wait to order parts.

If valves are closer to the bags thats just a faster reaction right?

but he is so short i cant find him either.. lol joking.. ill try him.

for decals not sundown related i just know he is here te most

i tryed to message him no answer. anyone?

biggest gain with the 4.6 is changing the heads and intake manifold unless its a some sort of forced induction

i think 6 15mm bolts under the seat. 2 or 3 12mm bolts on the back wall toward the bottom of the backrest and lift up.

is it 36 inches where the opening of the trunk is? i was saying around 26 inches for the narrowest point of the opening.

im going for 2 6.5's in my a pillars i got a extra set. any long drive ill just swap out pillars. and i dont drive my truck but on the weekends

you wont get a box into a g6 with those dimensions. the opening is only like 26" wide on those. and all the way back is only like 14 inches tall i think

biggest i can fit into the trunk opening is 36W x 15H x 18D on my 99 protege mine comes out to around 3.44 @ 32 with 40sq inch of port

he hates me too with transmissions. mine shifted hard and it broke, i only had 1st and 2nd. (auto) so i take it to a shop to fix.. a month later ive been drinking and i go slow over a curb but the other side is lower.. and i bottom out.. i think its just the frame and keep going.. but my crossmember hangs lower then my frame and its attached to the transmission. so 80 dollars later i fix it.. new crossmember(it got FUCKED) and a new tail housing piece for my transmission. big chunk missing from it..

i have them cut a piece for me at home depot and he cut it right on the dot. cause it was a huge piece i didnt want to mess with it by myself. since i built all my stuff all on my own i had them cut the 2 big pieces on there panel saw. he didnt use the measuring tape on the saw he used a hand one i think thats how they always fuck up is using the one attached to the saw.

i got 8 re se subs no problems.

you were in stockton?? daamn i missed me a demo. but i didnt hear any beat today so maybe you didnt play it haha

the alternator makes the power for your electrical not your block. if your going to your alternator for the ground no need to go to the block

just go from the alt to the battery and frame no need to go alt to the block.

i use my truck.

i drive when truck everywhere except for to work. cause it wastes to much gas. so mine is a daily that makes people look at me like WTF why is it so loud!

how are your speakers wired? maybe to low of an ohm load

crew cab has 4 actual doors? or the suicide style doors? i dont even know what i drive!!! but check out my build

tube amp in a car?? what about vibratons when the tubes are hot?