tibs

as long as it cuts and does it right. i dont care what i call it..

this one looks much different. http://wheelsnparts.com/product_info.php/products_id/661

i already wanted 1/2" everything. only thing im not sure about is cups for the front. i have a 99 f150 bolt in cups for my truck. http://www.theslamstore.com/product_p/fc-150.htm i dont know the height of the cups i need.

i was thinking the same thing. i just remember read that somewhere.. i cant wait to order parts.

If valves are closer to the bags thats just a faster reaction right?

but he is so short i cant find him either.. lol joking.. ill try him.

for decals not sundown related i just know he is here te most

i tryed to message him no answer. anyone?

biggest gain with the 4.6 is changing the heads and intake manifold unless its a some sort of forced induction

i think 6 15mm bolts under the seat. 2 or 3 12mm bolts on the back wall toward the bottom of the backrest and lift up.

is it 36 inches where the opening of the trunk is? i was saying around 26 inches for the narrowest point of the opening.

im going for 2 6.5's in my a pillars i got a extra set. any long drive ill just swap out pillars. and i dont drive my truck but on the weekends

you wont get a box into a g6 with those dimensions. the opening is only like 26" wide on those. and all the way back is only like 14 inches tall i think

biggest i can fit into the trunk opening is 36W x 15H x 18D on my 99 protege mine comes out to around 3.44 @ 32 with 40sq inch of port

he hates me too with transmissions. mine shifted hard and it broke, i only had 1st and 2nd. (auto) so i take it to a shop to fix.. a month later ive been drinking and i go slow over a curb but the other side is lower.. and i bottom out.. i think its just the frame and keep going.. but my crossmember hangs lower then my frame and its attached to the transmission. so 80 dollars later i fix it.. new crossmember(it got FUCKED) and a new tail housing piece for my transmission. big chunk missing from it..