t line box design.............ok updated with the pic what do you think

[Sampsonite]

Looks good. Interested to see how it turns out

[hertz hurts]

Well if I can get good enough feed back on it, I'm going to build it and start a build log. The back of the box is where I'm going to build the amp rack, over top of the bottom part where the "L" sticks out. Thinking about floating the amps there. Not sure yet. I'm decent at metal fabrication so I might make same floating racks with metal. Either that or it will just be a wall with a cover panel all carpeted in.

[3gAccord]

You're gonna brace the corners(don't remember the correct term for those 45's in the corners), right? I think you want as smooth of a wave path as possible.

[hertz hurts]

You meen like this?

[3gAccord]

Yep! What would be even better is some 10" PVC tube and cut it in 1/4's and put them in the corners!

[hertz hurts]

Yeah I've really been thinking of glassing it all. Keeping it curved and really maintaining the 10 inch port around the corners. Just not sure if it's really necessary or if just using the wood braces would suffice.

[3gAccord]

If you loose that 10", it would probably affect everything. Difference between the loudest, cleanest sounding Kickers or just another loud Kicker setup. You've spent all the effort tuning the box to be perfect with the subs and car, so I say spend an extra day building it and make it perfect.

[hertz hurts]

Yeah your right. If I'm going to do it, might as well do itall the way. I'll never be happy with it if I don't.

[3gAccord]

This is gonna be hella loud when you're done! What rig and amps?

[hertz hurts]

It's going in an 86 f150 regular cab pickup. Right now I've got a PA apc2200 for them, (I know Power Accoustic boooo) but I'm thinking I'm going to get me a couple sundown saz1000d's

.

Edited August 23, 2009 by hertz hurts