doughboi916 Posted April 18, 2007 Report Posted April 18, 2007 im trying to build a box today, but i can find the specs on the SWR-1242D, i went on the site and nothing, i need the DRIVER DISPLACMENT.
doughboi916 Posted April 18, 2007 Author Report Posted April 18, 2007 also for a ported box thay recomend 2 cubs but wut if its like 2.7?
doughboi916 Posted April 19, 2007 Author Report Posted April 19, 2007 http://www.subwoofertools.com/forum/ported...mp;Fs=&CE=0 seem rite??
ChevyBoy Posted April 19, 2007 Report Posted April 19, 2007 .071 is the displacement. its in the manual. and as for using to big of a box, you might bottom the sub/subs out and you will have to turn the gain down a little. and they call for .75 to 1.75 ported. heres the manual. go check the specs out for displacement and what not. http://akamaipix.crutchfield.com/Manuals/500/500SWR1242.PDF
dleccord Posted April 19, 2007 Report Posted April 19, 2007 also for a ported box thay recomend 2 cubs but wut if its like 2.7? 2.7 should be alright. just watch the power you're feeding it. refs: chode69, superduper
Mr. 973808 Posted April 19, 2007 Report Posted April 19, 2007 Nice box. Now go and make vids lol. THE GRADUATE 10:18:2007
KickerAudio21 Posted April 19, 2007 Report Posted April 19, 2007 I think that is a good size, despite what it says... I was never too happy with the compact box designs alpine recommended for the type R ------------------------------------------------- 1st place circuit city car/spl show (maplewood,MN) 2006 146.6 dB's with 2 12" L7 and 1606d brutus
Recommended Posts
Archived
This topic is now archived and is closed to further replies.