brsteinbach Posted October 10, 2009 Report Share Posted October 10, 2009 Hey guy's it didn't really bother me at first but now im kinda irritated and starting to get mad, The problem is one of my subs isn't moving as much as my other one. I switched around the signal cables and still the right one is moving more. The left one is closer to the port so IDK if that is the problem or what. Have any of you guy's ever have this problem? (It's the sub on the left obviously, the one closer to the port) Quote 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast.... Link to comment Share on other sites More sharing options...
Decaf Posted October 10, 2009 Report Share Posted October 10, 2009 (edited) maybe the sub not moving as much got disconnected and it just moving from the pressure of the other does the box have a L port and can u hook up each sub by itself to test each? Edited October 10, 2009 by Decaf Quote Link to comment Share on other sites More sharing options...
brsteinbach Posted October 10, 2009 Author Report Share Posted October 10, 2009 maybe the sub not moving as much got disconnected and it just moving from the pressure of the otherdoes the box have a L port and can u hook up each sub by itself to test each? It's has a little bit of a signal because if I put presure on it with my finger I can feel it lol. Yes its a L port I'm gonna go try each channel alone. Quote 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast.... Link to comment Share on other sites More sharing options...
ugpbmx Posted October 10, 2009 Report Share Posted October 10, 2009 i used to have these subs, and the lead wires used to come off sometimes. i would check that. Quote MY TRUCK BUILD - 1976 F-100 Ranger. Fully built 482 big block, 4 DC lvl4 15's in a blowthrough, plenty of custom fabrication. MY HATCH BUILD - 1993 Honda Civic DX Hatchback . Clean daily driver, dropped, subtle customization. Link to comment Share on other sites More sharing options...
Decaf Posted October 10, 2009 Report Share Posted October 10, 2009 after going on ebay i see these are dual voicecoils... maybe only 1 wire came loose on the sub not moving as much Quote Link to comment Share on other sites More sharing options...
HaMSaMMiCH Posted October 10, 2009 Report Share Posted October 10, 2009 It's has a little bit of a signal because if I put presure on it with my finger I can feel it lol. Yes its a L port I'm gonna go try each channel alone. You will still be able to feel it moving if the right one is going because they are sharing airspace and the pressure will move the cone on the left one. Check your wires, and if everything is hooked up right, you are probably experiencing loading issues(right sub has an easier time moving creating pressure and making it harder for the left sub to move) I've never been a fan of multi sub single port enclosures for specifically that reason....... Quote CAUTION! POOR INSTALLATION MAY SHORT BOTH YOUR SYSTEM AND WALLET Link to comment Share on other sites More sharing options...
brsteinbach Posted October 10, 2009 Author Report Share Posted October 10, 2009 Thank you Decaf. I made a noob mistake and didn't check by unpluging one of the channels and I had no bass! So my wire came undone in the box. Thanks again bro. and thanks ugpbmx Quote 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast.... Link to comment Share on other sites More sharing options...
alvitae Posted October 10, 2009 Report Share Posted October 10, 2009 I've had this problem and it was my jumper wire loose that was going from one coil to the other on my sub. Quote Link to comment Share on other sites More sharing options...
brsteinbach Posted October 10, 2009 Author Report Share Posted October 10, 2009 You will still be able to feel it moving if the right one is going because they are sharing airspace and the pressure will move the cone on the left one. Check your wires, and if everything is hooked up right, you are probably experiencing loading issues(right sub has an easier time moving creating pressure and making it harder for the left sub to move) I've never been a fan of multi sub single port enclosures for specifically that reason....... Yup thats was the prob. I should figured that but I didn't. Quote 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast.... Link to comment Share on other sites More sharing options...
Decaf Posted October 10, 2009 Report Share Posted October 10, 2009 (edited) Thank you Decaf. I made a noob mistake and didn't check by unpluging one of the channels and I had no bass! So my wire came undone in the box. Thanks again bro. and thanks ugpbmx no prob, sounded like a simple fix I've had this problem and it was my jumper wire loose that was going from one coil to the other on my sub. precisely ur welcome should be louder now too since u will lower the impedance hookin up another coil Edited October 10, 2009 by Decaf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.