merk_master Posted October 17, 2009 Report Posted October 17, 2009 I was wondering it there is a proper way to brace a wall can anyone post pictures of their bracing setup? or point me to a good thread? hopeful noob
mrwigglezdj Posted October 17, 2009 Report Posted October 17, 2009 i did 2 layers of 3/4 and used 2x4's to brace with ... let me find the page with my build pic to show.. Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets
Bumpindemlowzz Posted October 17, 2009 Report Posted October 17, 2009 edit: misread question 2010 Silverado 18" DC XL 18 DC 2k XS Power Batts
mrwigglezdj Posted October 17, 2009 Report Posted October 17, 2009 http://www.stevemeadedesigns.com/board/ind...t=0&start=0 there are some "ok" pics that show how i braced my wall. and when installed i bolted to the floor with lag bolts and simply wedeged 2x4's from the top of the wall to the roof of my van and then expandfoamed it in place the rest of the way Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets
Recommended Posts
Archived
This topic is now archived and is closed to further replies.