Jump to content
Second Skin Audio

waste of time?


Recommended Posts

I wanted to know would it be a waste of time for me to build a ported box for my subs (http://www.crutchfield.com/p_113W3011/Kenwood-KFC-W3011.html?search=kfcw3011&ssi=0&tp=111)? And before you say that i should get better subs, i would, but i cannot afford them right now. By the way this is going in a monte carlo ('97) so any ideas on what way to face subs and port also.

Edited by drewb53

2003 Chevy Blazerkenwood headunit4 ga. kicker wiringAQ1200D amp2 12" DC LVL 3'sStinger Volt MeterMy Build LogBlazer is no longer. Totaled 02/14/2012drew.png

no. this is for converting dc to ac. useful if you want to run a blender inside your car.

Link to comment
Share on other sites

It would be considering the subs you linked have been discontinued.

My comp setup (Not bad for what it is):

HP Compaq Presario V6120US laptop with:

15.4" widescreen

AMD Turion 64 X2 1.6GHz processor

2x1GB stick DDR2 SDRAM (667 Mhz)

Seagate Momentus 500GB SATA HDD

128MB shared video memory

Windows 7 Home Premium 64 bit

12 cell Lithium Ion battery (actual battery usage time: 6 hours)

What it does:

635670364.png4532707.png

On a USB 2.0 Wireless card

Link to comment
Share on other sites

i already have the subs... sorry forgot to mention.. but i have them in a sealed box right now.

2003 Chevy Blazerkenwood headunit4 ga. kicker wiringAQ1200D amp2 12" DC LVL 3'sStinger Volt MeterMy Build LogBlazer is no longer. Totaled 02/14/2012drew.png

no. this is for converting dc to ac. useful if you want to run a blender inside your car.

Link to comment
Share on other sites

build a nice sub/port back box if you want a little more out of them. just be really careful with anything touching those cones, they kinda have a tendency to just shatter apart if something touches em while theyre beating.

and build it a little beefier than you think you need, can always put new subs into a strong well designed box when the time comes ;)

Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build

monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now)

Team DC

Link to comment
Share on other sites

thank you so do you think it would be better to do slot or aero port? and what would you tune to? i like music that is low but i was thinking tuning like 35ish for everyday would that be bad?

2003 Chevy Blazerkenwood headunit4 ga. kicker wiringAQ1200D amp2 12" DC LVL 3'sStinger Volt MeterMy Build LogBlazer is no longer. Totaled 02/14/2012drew.png

no. this is for converting dc to ac. useful if you want to run a blender inside your car.

Link to comment
Share on other sites

what would be good to tune to for everyday?

35hz - 40hz is a normal tuning for ported box but if you like lows you could go a lil lower if you want i tune my stuff to like 28hz and up depening on who im building a box for but i personaly like around 30hz cause i listen to a lot of slowed music

lol. but i haven't and i don't plan on it. plus i'd probably miss and hit her belly button or her ear or something. lol.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1422 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...