lilmontez34 Posted November 11, 2009 Report Share Posted November 11, 2009 Greetings, I'm new here! As of now, I'm only running one sub which sounds good but I miss the other one. I've been haveing this issue for quite some time. I tested both subs individually and they both work fine. But when I try to connect both subs, it sounds distorted(EDIT: Both subs sound distorted). I also tried biwirering from the Power Acoustik's amp and it still sounded distorted. any idea's about what could cause this to happen. Here's my setup: red= power yellow= remote wire black with blue circle at end= ground(everything is grounded properly) black with red and white connects= RCA cables Orange= speaker wires Lilmontez34 Website Link to comment Share on other sites More sharing options...
loganberry Posted November 11, 2009 Report Share Posted November 11, 2009 nice diagram but that dosnt really tell us..ANYTHING My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk Link to comment Share on other sites More sharing options...
emmertb Posted November 11, 2009 Report Share Posted November 11, 2009 Greetings, I'm new here!I've been haveing this issue for quite some time. I tested both subs individually and they both work fine. But when I try to connect both subs, it sounds distorted. Here's my setup: exactly what amp are you using, is it mono or 2ch., model number ext. by that picture I'm seeing that you need to have both RCA wires plugged into the amp. get rid of that connector on your RCA's to your amp. thats why its distorted. the RCA's are right and left. You have IE. the left cable on an adapter then plugging into the amp it's going into the Left and Right input. see if that does anything 1992 Cadillac SeVille STS Pioneer DEH-P7600MD Pioneer Premier Surround JL Audio 10W7 Ported Kenwood KAC-7203 Kicker ZX350x4 My YouTube Link to comment Share on other sites More sharing options...
lilmontez34 Posted November 11, 2009 Author Report Share Posted November 11, 2009 nice diagram Thanks Lilmontez34 Website Link to comment Share on other sites More sharing options...
lilmontez34 Posted November 11, 2009 Author Report Share Posted November 11, 2009 exactly what amp are you using, is it mono or 2ch. PS2-1600 This is all I could find: Product MPN MPN: ps2-1600 Key Features Amplifier Type: Dual Channel Bridgable: Bridgable RMS Power at 4 Ohms: 310 W x 2 RMS Power at 2 Ohms: 370 W x 2 Performance Frequency Response: 10 Hz - 30000 Hz Signal to Noise Ratio: 97 dB THD at Rated RMS Power: 0.02 % Crossover / Equalizer Bass Boost: With Bass Boost Bass Boost Frequency: 40 Hz Low - Pass Frequency: 40 Hz - 120 Hz High - Pass Frequency: 150 Hz - 1500 Hz From this picture it appears to be Mono: by that picture I'm seeing that you need to have both RCA wires plugged into the amp. get rid of that connector on your RCA's to your amp. thats why its distorted. the RCA's are right and left. You have IE. the left cable on an adapter then plugging into the amp it's going into the Left and Right input. The tripped out thing is I've had this setup since 05' with the same setup and the subs use to work together. I'll still try it out and post the results. Lilmontez34 Website Link to comment Share on other sites More sharing options...
lilmontez34 Posted November 13, 2009 Author Report Share Posted November 13, 2009 I tried it, but I got the same results unfortunately. Any other idea's. Lilmontez34 Website Link to comment Share on other sites More sharing options...
emmertb Posted November 13, 2009 Report Share Posted November 13, 2009 I tried it, but I got the same results unfortunately. Any other idea's. I'd just take it up to a local car audio store. Like around here there's a couple like "street sounds" and "audio plus". Some places will test you shit. Like you just bring the amp in and they charge a few bucks, same with your woofers. But I would just ask someone to come out and take a look at it. When you ask them for advise just make it look like your gonna be spending your money with them to fix it if there is a problem. 1992 Cadillac SeVille STS Pioneer DEH-P7600MD Pioneer Premier Surround JL Audio 10W7 Ported Kenwood KAC-7203 Kicker ZX350x4 My YouTube Link to comment Share on other sites More sharing options...
fischy fisch Posted November 13, 2009 Report Share Posted November 13, 2009 idk if i missed it what subs do you have and what coils lol. but i haven't and i don't plan on it. plus i'd probably miss and hit her belly button or her ear or something. lol. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.