mlstrass Posted November 25, 2009 Report Share Posted November 25, 2009 Im getting two 10'' subs made by forevrbumpn on smd and gone throw a 3500d to them. at first im gone run about 1000rms to them each and then see how things go from there, also getting two extra recone kits for them just incase something may happen :01nocomment8so: other then that, the main diff is ill have new alt and batt and diff subs in this set up. allong with making the box look better. Should just recone the HDC's to alum coils and get another 3500... Quote Link to comment Share on other sites More sharing options...
2003f150 Posted November 25, 2009 Report Share Posted November 25, 2009 I run 4 AQ3500's in my daily set up. DC 270a alt and 8 Deka's. Long demo's aren't a problem, other then loss of hearing How low does your voltage drop when amps are wired all the way down?? Quote 2003 F150 Crew Cab Panasonic DVD Flip Out 4 9515F's Dual 2(i soft parts) 4 DD M3a's 350A singer alt 8 nsb 90's 1 Nsb 125 161.5 @ 46hz in the kick USACI Street Beat 4 2nd place USACI WF 158.5 @ 39hz LEGAL ON DASH 160's on music in kick Link to comment Share on other sites More sharing options...
Steph3n1 Posted November 25, 2009 Report Share Posted November 25, 2009 From what I remember he just set his gains up right before he got a clipped signal so he was never really gettin on it that hard Quote 2005 Ford Ranger Reg cab Build in Progress T3 Audio T2000 12 ARC SE4000 Stinger HPM 1/0 Wire DC power 270xp Batts: 1 Redtop up front and a Stinger SPP2250 in the back Hopes to be in and around a 150....weel see my youtube channel http://www.youtube.com/user/steph3n1 Team DBs (Driven By sound) Link to comment Share on other sites More sharing options...
wL<3bass Posted November 25, 2009 Report Share Posted November 25, 2009 (edited) From what I remember he just set his gains up right before he got a clipped signal so he was never really gettin on it that hard Huh? Setting your amp up before clip is putting out it full clean potential...which is GETTING on it... Edited November 25, 2009 by wL<3bass Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.