bgaccord Posted November 29, 2009 Report Posted November 29, 2009 i want to know if i have flare ports and the port calculator is telling me the port need to be 10" inches long do i have to include the flares too Or just the pipe has to be that long?
Nightshade Posted November 29, 2009 Report Posted November 29, 2009 If it says that you need to go 10" long then you will need to make the port 11" long. There is 1" of port length that is not usable on the flares. Basically it's .5" on each flare that really isn't used in the port length. This info can be found on the info sheet that comes with the Precision Ports. Edit: the entire port will need to be the 11" from flare to flare with them attached to the pipe. The pipe in the middle will be pretty short since a lot of the port length will be the flares themselves. 2013 VW Jetta GLI 2.0 Turbo 1 Sundown Audio SCV2000 1 Sundown Audio X15 V2 1 XS Power D3100 Audio Control LC6i Stock Deck 146.4 sealed on the dash at 37hz 2001 Focus ZX3: RETIRED Team Sundown Audio, Team XS Power, 2 time NSPL Car 3601-Up Champion, 2 time NSPL Car Hardcore ChampionHighest NSPL Scores to date:154.3db on the dash sealed at 46hz, 156.2db in the kick at 46hz155.2db unofficial on dash at 43hz
Recommended Posts
Archived
This topic is now archived and is closed to further replies.