TeejayBee Posted December 3, 2009 Report Share Posted December 3, 2009 Okay so help me under stand this RCA part better please? http://www.dealercostcaraudio.com/08zx3504.aspx It has to take four RCA cables two for each amp since there is two in the amp how am i supposed to do that? Link to comment Share on other sites More sharing options...
a_steezy Posted December 3, 2009 Report Share Posted December 3, 2009 Okay so help me under stand this RCA part better please?http://www.dealercostcaraudio.com/08zx3504.aspx It has to take four RCA cables two for each amp since there is two in the amp how am i supposed to do that? behind your deck you should have rca spots for 'front' and 'rear' you have to run 2 sets of rca's to the amp, this is for the 'front' channel, front door speakers and you run the other set to the 'rear' channel so you can adjust the fader and such. also i got that amp for $118 shipped to my door, kicker authorized with warranty from kicker : shop around a bit, and i've heard alot of bad things about dealer cost audio '98 Dodge Durango 5.9L 5% front windows, 2.5% on all backs Alpine CDA-9883 Kicker ZX350.4 Kicker KS650's in all doors Kicker 1/0 hyperflex Link to comment Share on other sites More sharing options...
OrionStang Posted December 3, 2009 Report Share Posted December 3, 2009 Hard to understand what you're asking, but i'll try. Your deck should have front, rear, and sub rca's. Send the front and rear to the 4 channel amp. If you only got two sets of rca's, one pair to the sub amp and get a y-splitter for the other rca so all 4 channels will get a signal. Only drawback to this is fader/balance control. Hope this helps. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
OrionStang Posted December 3, 2009 Report Share Posted December 3, 2009 Steezy me!! SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
TeejayBee Posted December 3, 2009 Author Report Share Posted December 3, 2009 behind your deck you should have rca spots for 'front' and 'rear'you have to run 2 sets of rca's to the amp, this is for the 'front' channel, front door speakers and you run the other set to the 'rear' channel so you can adjust the fader and such. also i got that amp for $118 shipped to my door, kicker authorized with warranty from kicker : shop around a bit, and i've heard alot of bad things about dealer cost audio I knew you'd respond to this lol i saw in your sig you have one and yeah i just knew id get a quick link from them and im getting it for about 100 i get dealer cost from my friend who deals kicker stuff But i have a sony xplod headunit for just now http://www.sonystyle.com/webapp/wcs/stores...552921665798662 can i still do that and dont forget i have to RCA my two Kicker 1000.1 Link to comment Share on other sites More sharing options...
a_steezy Posted December 3, 2009 Report Share Posted December 3, 2009 Steezy me!! lol i'm guessing two people trying to describe it is best, it's easier to just do, harder to explain haha, front from back of deck, to front on amp, same with back '98 Dodge Durango 5.9L 5% front windows, 2.5% on all backs Alpine CDA-9883 Kicker ZX350.4 Kicker KS650's in all doors Kicker 1/0 hyperflex Link to comment Share on other sites More sharing options...
TeejayBee Posted December 3, 2009 Author Report Share Posted December 3, 2009 Steezy me!! Lolz he did ninja you xD Link to comment Share on other sites More sharing options...
a_steezy Posted December 3, 2009 Report Share Posted December 3, 2009 I knew you'd respond to this lol i saw in your sig you have one and yeah i just knew id get a quick link from them and im getting it for about 100 i get dealer cost from my friend who deals kicker stuff But i have a sony xplod headunit for just now http://www.sonystyle.com/webapp/wcs/stores...552921665798662 can i still do that and dont forget i have to RCA my two Kicker 1000.1 dealer cost on that amp, is more than $100 i get dealer cost on kicker stuff also all day every day lol, there shit's still pricey. dealer cost is more than what you can get stuff for off the internet and i'm not sure about how you have the sub amps hooked up or whatever, probably do what stang said with the y-splitter '98 Dodge Durango 5.9L 5% front windows, 2.5% on all backs Alpine CDA-9883 Kicker ZX350.4 Kicker KS650's in all doors Kicker 1/0 hyperflex Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted December 3, 2009 Report Share Posted December 3, 2009 my friend has that same amp, he doesnt have front/rear on his HU so we had to get a splitter as for the "amp 1 and amp 2" features, one is for front channel and the other well, is for rear.. it has different runing options, 2 gain knobs, bass, and filter settings for each Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
TeejayBee Posted December 3, 2009 Author Report Share Posted December 3, 2009 Heres a pic of the back of my deck so i think i can do the amp but do i need a spliter for the front/sub ? or can i take the RCA's i have running from my two 1000.1's to the Amp 1 on the 350.4 and still have it work ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.