MrSkippyJ Posted December 25, 2009 Report Share Posted December 25, 2009 Current Equipment: Stock HU RF 3sixty.2 RF T400.4 (2 channels to doors, 2 channels bridged to sub) RF T1652-S components (front doors) DC Audio 12" Level 2 Update 6: Decided on and ordered new subs. Haven't arrived yet, which is ok I ordered them on Monday. Last page also now includes a picture of the birthsheet for my amp. Update 5: got the new amp, check last page for pics and new vid. Update 4: Just ordered a T1000-1BDCP to run a second 12" level2. That will allow my T400-4 to run my mids and highs. Box rebuild and adding second amp will have to wait till late May or early June. Update 3: was graciously offered to TL my car by TECHFORCE when I visited him. I know the number is low, but please remember there is less than 300 watts to the sub, and less than 500 watts for the whole damn system. One thing to fix is the weird high peak HZ (60hz right now). A port change (and box rebuild) should fix that. ANYWHO, with the mic on the dash I managed a 130 even @51hz. In the kick I managed a 131.9 @60hz. Happy, though I am ready for the new box and port. Update 2: bought some new RF components, T1652s. Should be installing tomorrow. Pics on last page. Update 1: NEW!!! Here is the latest vid. I haven't updated this first post much so I will now. The original install was a 12" JL sub that was nice, but the new DC Audio SHIT stomps the JL. Anyway, here is a vid, of the current setup. Feel free to scroll through the pages to see the build and other vids! UPDATE: vid of new mids and highs First vid with new sub (sorry so dark) So the subs are messed up, but the doors, amp rack, bass knob and fuse holder is done. Pics and a LAME video, it's 2 8s and they are messed so don't set any high expectations for this video. Video: (video still has the 8s, no vid with 12 yet) Pics: Fuse holder Bass knob Amp (fits under seat) Doing work (well my dad was anyway) F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
treossi Posted December 25, 2009 Report Share Posted December 25, 2009 that's pretty good work.. anymore pics ? Team sundownWESTCOASTSPL.COM we're throwing dbdrag events very soon visit the website for details Link to comment Share on other sites More sharing options...
BEllithorpe04 Posted December 25, 2009 Report Share Posted December 25, 2009 love the bassknob, fits perfect. where exactly is the battery that the fuse holder is in the center console? 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build Link to comment Share on other sites More sharing options...
MrSkippyJ Posted December 25, 2009 Author Report Share Posted December 25, 2009 that's pretty good work.. anymore pics ? Thanks! Yes I have a few more pics, will put them up in a bit. love the bassknob, fits perfect. where exactly is the battery that the fuse holder is in the center console? Thanks! That spot really did work out well. Only one battery, under the hood. Battery ---> 250 amp fuse --------------------------------------- 100 amp fuse ---> amp. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Alexdb7 Posted December 25, 2009 Report Share Posted December 25, 2009 that rocks man! i wish i didnt have all the heated seat crap under mine and i could do that Custom Car Audio (815) 916 - 9194 www.midwestsplcustoms.com 2000 Tahoe | 22" GREED Celebrities Alpine CDA-117 Dual 0/1 Runs (3) 925 CA Group 31 In Back (4) 18" FI Audio Q's (W/ Extra Spider) (4) Hifonics BXi 2010D Hifonics ZXi 4410 4 RF P1653 6 1/2's Big 3 All Kicker/Knu Wiring Link to comment Share on other sites More sharing options...
MrSkippyJ Posted December 25, 2009 Author Report Share Posted December 25, 2009 Couple more pics. The pics of the amps under the seat here are before I built that little amp rack. I will get some pics of how it looks now later on at some time. Amp with seat all the way forward: Amp with seat normal position: Crossovers in upper glove box: Doors: That is all for now and some of these I have posted before. When I start on the box I continue to use this thread. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
MrSkippyJ Posted December 25, 2009 Author Report Share Posted December 25, 2009 that rocks man! i wish i didnt have all the heated seat crap under mine and i could do that Thanks man! I am very excited I could fit the amp under my seat, nice and stealthy. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
MrSkippyJ Posted December 29, 2009 Author Report Share Posted December 29, 2009 Ok here goes. I know, JL blah blah. It was cheap and not blown like my 8s. This is my first attempt at making a box that is something other than a rectangle. I should also mention I have no table saw or router, so circular saw and *gasp* jig saw. First flush mounting attempt and first false floor so be nice. I have no trim pieces yet but here is where the box stands now. Blank wood: No baffle, in car: No baffle, in car (different view): Test fitting pieces: Liquid Nail FTW: F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
actafool4187 Posted December 29, 2009 Report Share Posted December 29, 2009 i'm no pro, but aren't you supposed to put your in-line fuse within a few feet of the battery? i think that's y bellithorp04 asked about your battery location Pioneer AVH P5900DVD JL Audio XR525 CSi Components (Kickpanels) Infinity Reference 6020cs Components (Doors) JL Audio 12W7 Subwoofer JL Audio e1800D Amplifier JL Audio e4300D Amplifier Link to comment Share on other sites More sharing options...
lowrthnu92 Posted December 29, 2009 Report Share Posted December 29, 2009 i'm no pro, but aren't you supposed to put your in-line fuse within a few feet of the battery? i think that's y bellithorp04 asked about your battery location Thanks! That spot really did work out well. Only one battery, under the hood. Battery ---> 250 amp fuse --------------------------------------- 100 amp fuse ---> amp. My truck Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.