nuboot Posted December 28, 2009 Report Share Posted December 28, 2009 well heres my first ever design using sketch up each of the sides are 26h x 15w x 45d for 8.3 cubes and the opening area will act as the ported area and the measurement to the area is 26h x 25x 45d so iits about 650 square inches of port area and tuned to around 43 hz so does that look and sound right hopefully this box hit the lows do a possible hair trick and still put up decent numbers HEADUNIT:Pioneer AVic d3 WIRING: 8 runs of 1/0 knu gnd and pwr BATTERIES: 1 shuriken bt80 upfront 4 in the back COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s AMPS: 2 powerbass xa3000d powerbass Asa 400.4 SUBS: 4 db drive plw 15s ENCLOSURE:12.7 cubes 32hz ALT: 150a stock for now VEHICLE:05 chevy trailblazer sitting on 24s iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289 Link to comment Share on other sites More sharing options...
kryptonite Posted December 28, 2009 Report Share Posted December 28, 2009 damn, whats that goin in again? DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
Steph3n1 Posted December 28, 2009 Report Share Posted December 28, 2009 so its a 4th order right? 2005 Ford Ranger Reg cab Build in Progress T3 Audio T2000 12 ARC SE4000 Stinger HPM 1/0 Wire DC power 270xp Batts: 1 Redtop up front and a Stinger SPP2250 in the back Hopes to be in and around a 150....weel see my youtube channel http://www.youtube.com/user/steph3n1 Team DBs (Driven By sound) Link to comment Share on other sites More sharing options...
Maxim Posted December 28, 2009 Report Share Posted December 28, 2009 I don't get how the open area in the middle acts as the port. From what I can see, it's two huge sealed boxes facing each other. You need more angles of the box for me to really see whats going on... wtf is lolcats? I'd def get a fat hooker if i had to resort to that kinda thing. I feel like they'd be grateful and work harder. Also its more bang for my buck, more real estate for my dollar if you catch my drift. its like the Costco of streetwalkers. I was hoping for 150 . I was hoping she would let me put it in her butt Link to comment Share on other sites More sharing options...
skittlesRgood Posted December 28, 2009 Report Share Posted December 28, 2009 I don't get how the open area in the middle acts as the port. From what I can see, it's two huge sealed boxes facing each other. You need more angles of the box for me to really see whats going on... it only looks that way because the port is so big. its basicaly a really big 4th order box. i dont know the math enough to help out but it looks like itll be a fun build. If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
nuboot Posted December 28, 2009 Author Report Share Posted December 28, 2009 damn, whats that goin in again? in my trailblazer behind the front seats and then walling it off also i need to add loading walls to make it a fourth order HEADUNIT:Pioneer AVic d3 WIRING: 8 runs of 1/0 knu gnd and pwr BATTERIES: 1 shuriken bt80 upfront 4 in the back COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s AMPS: 2 powerbass xa3000d powerbass Asa 400.4 SUBS: 4 db drive plw 15s ENCLOSURE:12.7 cubes 32hz ALT: 150a stock for now VEHICLE:05 chevy trailblazer sitting on 24s iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289 Link to comment Share on other sites More sharing options...
nuboot Posted December 28, 2009 Author Report Share Posted December 28, 2009 ok here it is with the loading wall HEADUNIT:Pioneer AVic d3 WIRING: 8 runs of 1/0 knu gnd and pwr BATTERIES: 1 shuriken bt80 upfront 4 in the back COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s AMPS: 2 powerbass xa3000d powerbass Asa 400.4 SUBS: 4 db drive plw 15s ENCLOSURE:12.7 cubes 32hz ALT: 150a stock for now VEHICLE:05 chevy trailblazer sitting on 24s iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.