Neo_frog Posted January 23, 2010 Report Posted January 23, 2010 So I've decided to stick with something simple, yet permanent. I really can't stuff that much into this car but after many months of planning in Iraq, I've come up with the final setup before the PT goes bye bye... I've had a lot of fun with this car. Let's take a stroll through history shall we? Here was the first PT system. Two Memphis M3s on an MCD1000. My first wall... Four Memphis M3 12s on two MCD1000s. In preparation for a future build I downgraded a bit... My 12 12s. The subs were on the sides. My first shot at going HUGE. Four Memphis MOJO 12s on four MCD4KWs. The build ended with five cooked batteries and one broken cone... =( I then tried something ridiculous... 32 10s. The build was shit because of inexperience, but it was loud as FAWK for the short duration. Thanks James for setting me straight A better box, but still a shitty build. I tried a clamshell with 16 10s. I got some sense in me and did a lot of planning which yielded my first truly successful build. Upgraded to MOJO 15s... I've had many power issues and went through hell trying to resolve them. My suspension has been replaced twice now, and it's REALLY dragging now with the new weight in it. Due to all the former builds, this car has the following: Rear battery bank: 6 Kinetik HC2400s and 2 HC1400s. Front bank: 2 PM D3100s and two Custom G31 batteries and PM Intellicharger MLA module 14.7/15.3V 300A Iraggi Alternator Eclipse AVN7000 HU 6 runs of +/- front to back with 1/4" copper buss bars under hood/ 3/8" aluminum bussbars for banks The new build started before I left for Iraq, and I picked up where I left off. This one is by far the most solid and guaranteed success. Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/
Team Sundown's Charles Posted January 23, 2010 Report Posted January 23, 2010 Welcome home...now get to 1993 Mazda Mx-3 Subs: 2 18" DC Audio Lvl 4 D.7 Highs amp: Sundown SAX-100.4 Sub amp: Sundown SAZ-3000D Electrical:Kinetik 1200 under hood, 2-Kinetik 2400 rear All 1/0 KnuKonceptz Wire Power/Ground, Big 3, 8Ga Speaker Wire, KnuKonceptz Karma RCA's Dampening: 120sqft 80Mil Thick Sound Destroyer Mat Goal: 150 DB 149.9 Street Bass
Neo_frog Posted January 23, 2010 Author Report Posted January 23, 2010 So now we start with a good plan and better technique. I've decided to just drop 2 18s in a simple wall, custom doors (that will be redone in this thread), and the pillars. Here's the start... Gutted once again... Gots all the tools ready Fresh paint on all the interior Doors installed Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/
crazyfrazz09 Posted January 23, 2010 Report Posted January 23, 2010 what did you do with all of the old equipment you took out? 1998 jeep grand cherokee future teardown and rebuild: 2-15.4 orion hcca's sub amp undecided 2 sets of components 1-concept amp (mids/highs) undecided h.o. alt 2-yellow tops
splzx3 Posted January 23, 2010 Report Posted January 23, 2010 lookin good bro keep it up and Welcome home ________________________________________________________________________ deepsilencer, on 22 Aug 2011 - 17:32, said: splzx3, on 22 Aug 2011 - 17:27, said: i had my fun on one of his videos...till he blocked me then i got my mother into it lol after her he closed the comments xD lol your mom is a G! WTF, I never thought I'd have a conversation about cross dressers and trans-genders on a car audio forum.
Neo_frog Posted January 23, 2010 Author Report Posted January 23, 2010 So now we start with the wall Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/
Neo_frog Posted January 23, 2010 Author Report Posted January 23, 2010 And this is where I sit now. I cut some bracing and started the baffles, but the picture is kinda boring. I guess being away from tools for so long, I kinda suck now I cut right through the cord with my table saw, and cutting the first hole, my router blew up like fourth of July. I have all weekend to work on it, so I'll get the full structure done hopefully. Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/
__d_a_v_i_d__ Posted January 23, 2010 Report Posted January 23, 2010 damn you must be getting that greeeenn for all those builds!!! sexy stuff man keep it upppp Chevy Impala Shocker Sigs / TC Sounds 12s Sundown NS-1 | SAX 100.4 Sundown Neos | Dayton Audio Neos ETCCC ETCCC ETCCC My YouTube ---- Subcribe!!
Neo_frog Posted January 23, 2010 Author Report Posted January 23, 2010 what did you do with all of the old equipment you took out? I sold the majority of it. I think all that's left is four 10s. Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/
uhoh_45 Posted January 23, 2010 Report Posted January 23, 2010 I cut right through the cord with my table saw, how does one do this R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log
Recommended Posts
Archived
This topic is now archived and is closed to further replies.