OrionStang Posted February 5, 2010 Report Share Posted February 5, 2010 Just to see, I hooked up the DMM and turned the gain up a little over halfway on my zx2500, I got 104.xx volts. According to a popular chart on this forum, my amp goes off the chart at over 5000 watts at a 2 ohm load. Either my dmm is fucked up, the chart is off, or I got a bad ass kicker amp. Any thoughts on this? BTW, I need 69.82 volts to get the 2300 watts I want. I hit that voltage with the gain just under a quarter turn. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Decaf Posted February 5, 2010 Report Share Posted February 5, 2010 Just to see, I hooked up the DMM and turned the gain up a little over halfway on my zx2500, I got 104.xx volts. According to a popular chart on this forum, my amp goes off the chart at over 5000 watts at a 2 ohm load. Either my dmm is fucked up, the chart is off, or I got a bad ass kicker amp. Any thoughts on this?BTW, I need 69.82 volts to get the 2300 watts I want. I hit that voltage with the gain just under a quarter turn. i dont get it do u use a line driver? im guessing yes since u have a facotry headunit, in which case if its putting out 6v+ the gain will be at about 1/4 or less or u have bass really high on the deck eq which, who knows Link to comment Share on other sites More sharing options...
OrionStang Posted February 5, 2010 Author Report Share Posted February 5, 2010 My line drivers putting out 5 volts, so I guess quarter gain is right. Just making sure because it seems like this sub can take a whole lot more. And I set it with all deck levels zeroed. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.