D_man1987 Posted February 23, 2010 Author Report Share Posted February 23, 2010 lookin good how about some vidz of it playin when its all back together lovin the ss build my buddys shop did a durango 4 T5 twelves on two pca2000d in a clamshell it knocks well this build is in my YUKON, the SS is my brothers and i am just doing as fiberglass box inside his under seat toolbox for one sony 10" and a lignting audio 300w amp, i didn't think it was interesting enough to do a whole build log And i used to have 4 T-5's on 2 t5002 doing 147.6DB, it was bangin for only 4 12's in the back of my yukon 1996 GMC YUKON 2dr Eclipse cd5000 six- Soundstream T5 12's in 13^ft tuned to 30.4hz,43.04hz, and 53.53hz soundoff 149.8 on TL in kick,150.0 SEALED in kick 147.8 SB4 3 RF T5002's--------------going to 3 Soundstream DTR1.3400D's two- Stinger sp1000's----going to two- BATCAP 4000's 2 140 amp alternators---going to 300amp Ohio Generator 2 runs 1/0ga, big 3-------going to 4 runs 1/0g + and 3 runs 1/0g - MB Quart QSD 6.5's in doors---soon to come my build log HERE!!!! check it out! Link to comment Share on other sites More sharing options...
D_man1987 Posted March 3, 2010 Author Report Share Posted March 3, 2010 just as an update... i barely did the alternator last night but haven't done anything else due to the fact i came down with bronchitis and a really bad case of pnemonia.. so I am feeling better and just need to get caught up on some other things and then it is once again build time!!!!! 1996 GMC YUKON 2dr Eclipse cd5000 six- Soundstream T5 12's in 13^ft tuned to 30.4hz,43.04hz, and 53.53hz soundoff 149.8 on TL in kick,150.0 SEALED in kick 147.8 SB4 3 RF T5002's--------------going to 3 Soundstream DTR1.3400D's two- Stinger sp1000's----going to two- BATCAP 4000's 2 140 amp alternators---going to 300amp Ohio Generator 2 runs 1/0ga, big 3-------going to 4 runs 1/0g + and 3 runs 1/0g - MB Quart QSD 6.5's in doors---soon to come my build log HERE!!!! check it out! Link to comment Share on other sites More sharing options...
D_man1987 Posted March 7, 2010 Author Report Share Posted March 7, 2010 ok so having bronchitis and pneumonia slowed me down and i am still having to take all kinda meds and breathing treatments 4 times a day, but i am back to building!!!!!!! so here we go I installed alternator still need to do BIG3 but have a ground post also on frame and on accessory drive next up, battery in rear, and no that isn't permanent mounting but wanted to get wiring in Also closer look at how i said ground went to frame: ground also goes from here(grounding stud through body) to here(which is bolted to same bolt from under) Now to fusing rear battery cables i am going to mount the fuse above the battery and have nothing to really bolt to as box doesn't leave much room so i tied all fuse holders together with an aluminium strap with t-nuts(brad style)and to make sure they didn't move also some hot glue UNDERside top veiw Fuse holders on top of battery now i just need to go buy some tie-straps to hold them and wire better. NOW..... ONTO THE BOX... I made port smaller and put 45's in their corners and smoothed some more and painted... I'm not sure if this is how i want it yet, but either way it is drying and i had 1 drip and another part that wasn't too smooth, so re-sand and smooth some more and paint top black again or green to match yukon exterior color and also sides and rear(against tailgate) will be carpeted so what do you guys think? 1996 GMC YUKON 2dr Eclipse cd5000 six- Soundstream T5 12's in 13^ft tuned to 30.4hz,43.04hz, and 53.53hz soundoff 149.8 on TL in kick,150.0 SEALED in kick 147.8 SB4 3 RF T5002's--------------going to 3 Soundstream DTR1.3400D's two- Stinger sp1000's----going to two- BATCAP 4000's 2 140 amp alternators---going to 300amp Ohio Generator 2 runs 1/0ga, big 3-------going to 4 runs 1/0g + and 3 runs 1/0g - MB Quart QSD 6.5's in doors---soon to come my build log HERE!!!! check it out! Link to comment Share on other sites More sharing options...
JBIRD Posted March 7, 2010 Report Share Posted March 7, 2010 looks sick dude i like them amps let us know how they work out for you> i might use a couple of them in my next build Link to comment Share on other sites More sharing options...
bassHZ Posted March 7, 2010 Report Share Posted March 7, 2010 how come those fuse holders dont have fuses ... or am i trippin out Link to comment Share on other sites More sharing options...
D_man1987 Posted March 7, 2010 Author Report Share Posted March 7, 2010 how come those fuse holders dont have fuses ... or am i trippin out no your not trippin out, i just haven't put any in yet since my system isn't in yet.Also my front battery isn't in yet either so i am not putting in fuses until that is in either. maybe tomorrow i will make a piece to hold my amps and fuse holders for them as well as smooth box some more and give it another coat. 1996 GMC YUKON 2dr Eclipse cd5000 six- Soundstream T5 12's in 13^ft tuned to 30.4hz,43.04hz, and 53.53hz soundoff 149.8 on TL in kick,150.0 SEALED in kick 147.8 SB4 3 RF T5002's--------------going to 3 Soundstream DTR1.3400D's two- Stinger sp1000's----going to two- BATCAP 4000's 2 140 amp alternators---going to 300amp Ohio Generator 2 runs 1/0ga, big 3-------going to 4 runs 1/0g + and 3 runs 1/0g - MB Quart QSD 6.5's in doors---soon to come my build log HERE!!!! check it out! Link to comment Share on other sites More sharing options...
sounddesires Posted March 8, 2010 Report Share Posted March 8, 2010 very nice! i like how all ur +'s match color good attention to detail if u ask me...anyway looks great can't wait to see more Link to comment Share on other sites More sharing options...
D_man1987 Posted March 8, 2010 Author Report Share Posted March 8, 2010 very nice! i like how all ur +'s match color good attention to detail if u ask me...anyway looks great can't wait to see more well i actually ran out of (+)red ring terminals, so I am waiting on some more... So tomorrow if it is nice i will have more progress from you guys and hopefully a hairtrick this next weekend 1996 GMC YUKON 2dr Eclipse cd5000 six- Soundstream T5 12's in 13^ft tuned to 30.4hz,43.04hz, and 53.53hz soundoff 149.8 on TL in kick,150.0 SEALED in kick 147.8 SB4 3 RF T5002's--------------going to 3 Soundstream DTR1.3400D's two- Stinger sp1000's----going to two- BATCAP 4000's 2 140 amp alternators---going to 300amp Ohio Generator 2 runs 1/0ga, big 3-------going to 4 runs 1/0g + and 3 runs 1/0g - MB Quart QSD 6.5's in doors---soon to come my build log HERE!!!! check it out! Link to comment Share on other sites More sharing options...
Loudintha509 Posted March 8, 2010 Report Share Posted March 8, 2010 shit looks clean like how you did the aluminum for the fuse holders. I wish every body had beat so I wouldnt have to turn my shit down. Fosgate for life running there shit since I was 16 going on 15 years strong. Not stopping any time soon. Link to comment Share on other sites More sharing options...
D_man1987 Posted March 9, 2010 Author Report Share Posted March 9, 2010 ok, well i had painted the box black, but i wasn't very happy with it, so i sanded it and smoothed it some more and used some glazing putty to fix some of the small stuff... So not near done, but here is a sample And sides are going to be carpeted so that is why they are not smoothed very dusty cause it was very windy today, but you get the idea, oh and it looks kinda blue here, but it is "deep jewel green" to match my yukon so i still need alot more sanding then a nice day to paint, but this is what i did today so how do you think it looks? 1996 GMC YUKON 2dr Eclipse cd5000 six- Soundstream T5 12's in 13^ft tuned to 30.4hz,43.04hz, and 53.53hz soundoff 149.8 on TL in kick,150.0 SEALED in kick 147.8 SB4 3 RF T5002's--------------going to 3 Soundstream DTR1.3400D's two- Stinger sp1000's----going to two- BATCAP 4000's 2 140 amp alternators---going to 300amp Ohio Generator 2 runs 1/0ga, big 3-------going to 4 runs 1/0g + and 3 runs 1/0g - MB Quart QSD 6.5's in doors---soon to come my build log HERE!!!! check it out! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.