Jump to content

just made this custom box for my wifes orion hcca. video now added


Recommended Posts

i built this for my wife's orion hcca 4000 watt sub.

the box is 3.7 cubic feet slot ported built above manufactures specs.. why because i knew i would get more sound from a bigger box..

here is the deal the sub can handle 3000 watts rms power daily with no problems.. my zapco amp is only pushing out probally about 1400 watts rms.. so in order to sound better you need a bigger box to make up for the sub being under powered..

i made this box to fit perfectly in the trunk right under the rear deck where the 6x9's are and to not take up hardly no room.. it fits perfect.. and the sound is amazing..

only thing left to do is to cover it up.. im unsure is im doing carpet or leather or what color as well..

so for now i just hooked it up in my house to bench test it and holy cow its fooking loud.. my kitchen cabinets opened up and 1 of my plates fell out and broke... :shock: :twisted:

this box and sub is just straight sick.. i made a video but every time i try to upload it on photobucket it will freeze and get stuck at 60%. but i will find out a way to upload it.. you can see the subs 4'' of excursion in the video.. the amount of air it moves is just insane for a 10'' sub..

th_CIMG0331.jpg

CIMG0308.jpg

CIMG0309.jpg

CIMG0314.jpg

CIMG0315.jpg

CIMG0317.jpg

CIMG0321.jpg

CIMG0320.jpg

CIMG0324.jpg

CIMG0327.jpg

CIMG0323.jpg

CIMG0330.jpg

CIMG0324.jpg

CIMG0329.jpg

Edited by kickerfanatic

4 15'' kicker L7 subs ( only 2 being used right now )

1 kicker zx2500.1 ( another soon 2 come )

box is 9.5 cubic feet slot portd thur the back seat

1 kicker zx650.4 amp powering 4 10'' ev dl10x mids ( rear deck )

1 kicker zx350.4 power 4 8'' beyma 8mi100 mid/highs ( 1 on each door )

2 runs of zero gauge wire ( about 60 feet total. )

big 3 done in zero gauge kicker wire

3 runs of 4 gauge for voice amps and eq' and crossover

2 kinetik hc1800 batteries in the trunk and 1 optima yellow top under the hood

260 amp irragi high output alternator ( soon to be 2 alt's )

alpine cda 9856 ipod headunit

kicker kx3 3 way crossover & a old school alpine 3342 digital 11 band sound field processor eq.

( search for ( 88bonnsse ) on youtube.com to see my videos..

Link to comment
Share on other sites

BIG box!! Orion & ZAPCO... can't go wrong with that!! Waitin for Vids!

i did a bench test video using a kinetik hc1800 but the damn thing wont upload in photobucket for me.. as soon as i can figure out whats wrong i will upload the vid.. so check back..

4 15'' kicker L7 subs ( only 2 being used right now )

1 kicker zx2500.1 ( another soon 2 come )

box is 9.5 cubic feet slot portd thur the back seat

1 kicker zx650.4 amp powering 4 10'' ev dl10x mids ( rear deck )

1 kicker zx350.4 power 4 8'' beyma 8mi100 mid/highs ( 1 on each door )

2 runs of zero gauge wire ( about 60 feet total. )

big 3 done in zero gauge kicker wire

3 runs of 4 gauge for voice amps and eq' and crossover

2 kinetik hc1800 batteries in the trunk and 1 optima yellow top under the hood

260 amp irragi high output alternator ( soon to be 2 alt's )

alpine cda 9856 ipod headunit

kicker kx3 3 way crossover & a old school alpine 3342 digital 11 band sound field processor eq.

( search for ( 88bonnsse ) on youtube.com to see my videos..

Link to comment
Share on other sites

can you post pictures of the car???? im about to inherit one and i want to see what all can be done to them!

dude, what can't be done with a GM A-Body!! You can put dead bodies in those trunks :01nocomment8so: If you take the factory spare out, you can easily get 4 15"s in there. There will be some (OK ALOT of) trunk rattle, but that's what deadener is for.

BTW... if it doesn't already have one, put on a plastic gas cap, and use some clear silicone to fill the gap between the license plate and the gas filler door hinge, and around the tail light sockets. That will help alot.

I've had knock in my 77 Delta for years, almost perfected keeping it quiet :good:

Man I'm glad I didn't lock this I get to witness two retards holding hands telling each other that it'll be ok because they are awesome.

Link to comment
Share on other sites

Those 10" HCCA's are beast! I had one before my 2 15's. I had to recone it b/c it blew, but it was very simple. And that port is not too small. It looks good.

I thought Orion rated the 10's at 1500 rms and 3000 max..? I'd made a smaller box if you plan to use 3K watts.

My 93 chevy truck Orion HCCA 15's Build

6K HID's

2 orion HCCA 15.4

2 AP30001D's

2 optima yellowtops, 2 C&D 270fr's, all 3 tsunami 1/0, CS144 190 amp

Rockford p200-2

Rockford p200-2

Rockford p300-1

Kole KX1 5500D -broken

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1455 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...