teddy9090 Posted February 16, 2010 Report Share Posted February 16, 2010 ok so iv probably blown my engine in my truck to im ganna be rebuilding it and doing all my audio before i even drive my truck again. so iv been throwing around ideas with my dad ( hes an old basshead from the 80"s back when bass first became popular) and we kinda decided i dont want to cut a big ass hole in my cab in case i want to resell it later in life. so we came up with putting a solid fiberglass topper on my truck and putting an according boot between the window and a hole in the topper what im askin is i wanna do 4 15's in the back with batts and amps and im ganna mdf all the walls in it and fiberglass all the seams so its air tight and i wanna kno if it will travel thru the opening like it would if it where inside the cab? now the only way in or out of this area will be the window from the cab to the bed with a mdf wall in the back so you will have to take the back wall out to take anything big out. but will this work? would it still slam and sound good? Quote Link to comment Share on other sites More sharing options...
xtremeacoustiks Posted February 16, 2010 Report Share Posted February 16, 2010 works for me really good Quote www.bassproducers.com TEAMS TEAM BASSPRODUCERS, TEAM HERTZ (VA) *Ranger System* (4) 18" Kicker Comp (4) 10" Kicker Comp Dual Stinger Alts. (5) Rockford Punch 200's (2) Punch 100's *Outlander System*152.6 DB so Far* ( TXX-APX12W (2) AP-30001D'S (2) AP-2004'S ( APMB6'S (4) KHC2400'S Link to comment Share on other sites More sharing options...
teddy9090 Posted February 16, 2010 Author Report Share Posted February 16, 2010 yeah but its not ganna be a wall it will be laying on the bed with the subs firing up port firing at the back wall Quote Link to comment Share on other sites More sharing options...
xtremeacoustiks Posted February 16, 2010 Report Share Posted February 16, 2010 it would in all reality just be like an SUV if you have it all sealed up good around the snug top Quote www.bassproducers.com TEAMS TEAM BASSPRODUCERS, TEAM HERTZ (VA) *Ranger System* (4) 18" Kicker Comp (4) 10" Kicker Comp Dual Stinger Alts. (5) Rockford Punch 200's (2) Punch 100's *Outlander System*152.6 DB so Far* ( TXX-APX12W (2) AP-30001D'S (2) AP-2004'S ( APMB6'S (4) KHC2400'S Link to comment Share on other sites More sharing options...
teddy9090 Posted February 16, 2010 Author Report Share Posted February 16, 2010 it will be im ganna place mdf on all the walls roof and floor and back and fiberglass all the seams and rattle can it all black so its dark and no one can see back there but itl all be air tight in the back the cab will be like it is. so it would basically be like an suv just not as open tho Quote Link to comment Share on other sites More sharing options...
xtremeacoustiks Posted February 16, 2010 Report Share Posted February 16, 2010 it will be im ganna place mdf on all the walls roof and floor and back and fiberglass all the seams and rattle can it all black so its dark and no one can see back there but itl all be air tight in the back the cab will be like it is. so it would basically be like an suv just not as open tho yes sir Quote www.bassproducers.com TEAMS TEAM BASSPRODUCERS, TEAM HERTZ (VA) *Ranger System* (4) 18" Kicker Comp (4) 10" Kicker Comp Dual Stinger Alts. (5) Rockford Punch 200's (2) Punch 100's *Outlander System*152.6 DB so Far* ( TXX-APX12W (2) AP-30001D'S (2) AP-2004'S ( APMB6'S (4) KHC2400'S Link to comment Share on other sites More sharing options...
teddy9090 Posted February 16, 2010 Author Report Share Posted February 16, 2010 ok thank you sir i appreciate it Quote Link to comment Share on other sites More sharing options...
Namosh Posted February 16, 2010 Report Share Posted February 16, 2010 works for me really good Is this going through the sliding window or did you take the window out? I think what he is wanting to do is go through the window. That isn't a lot of area for 4 15's. I am sure it could work fine but it would take plenty of bandpass knowledge. Quote My Ram Quad Cab Blow-through Link to comment Share on other sites More sharing options...
Hotdog Posted February 16, 2010 Report Share Posted February 16, 2010 (edited) Are you going to try and port it through the window in the center or are you taking the window out completely? xtremeacoustiks - I love the art work on that truck. Edited February 16, 2010 by Hotdog Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
rmzsuzuki89 Posted February 16, 2010 Report Share Posted February 16, 2010 (edited) Maybe a 4th order with the port going through the window and sealed off? Pics of truck and area to use? Edited February 16, 2010 by rmzsuzuki89 Quote My Feedback Thread http://www.stevemeadedesigns.com/board/topic/103868-official-rmzsuzuki89-feedback-thread/page__pid__1441542#entry1441542 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.