Jump to content

Questions on Install...Help?


Recommended Posts

Posted

hey guys. i have been getting ready to install my alarm soon and I have been reading up a lot esp in here on what i should do. I almost completely ready except for two things.

First of all, I am putting a Viper 5901 in a 1999 Chevy Cavi.

So my first question is what is the purpose of a T harness? my take on it is just to make some of the connections faster and easier...

And second, the book says that i need a Bitwriter to program the unit. Any suggestions on that?

Posted
hey guys. i have been getting ready to install my alarm soon and I have been reading up a lot esp in here on what i should do. I almost completely ready except for two things.

First of all, I am putting a Viper 5901 in a 1999 Chevy Cavi.

So my first question is what is the purpose of a T harness? my take on it is just to make some of the connections faster and easier...

And second, the book says that i need a Bitwriter to program the unit. Any suggestions on that?

t-harness or t-tap?

And you can program the unit via the valet button on the antenna... There should be a listing of the menus in the box.

-Installer for Duke's Car Stereo

2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune.

RF T1000-1bdCP and T400-4

Boston Acoustics SPG 555

Kenwood eXcelon 995

RF Punch 6.5" components and MB Quart Premium 6x9"s

Powermaster Alternator, YellowTop D34, Vmax CT1000

Posted

sorry for the wording. itd be the t harness with all the plugs and such. they are like 40 bucks on ebay and i was just wondering what the purpose is for one...

Posted
sorry for the wording. itd be the t harness with all the plugs and such. they are like 40 bucks on ebay and i was just wondering what the purpose is for one...

Waste of money... just make the connections instead.

-Installer for Duke's Car Stereo

2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune.

RF T1000-1bdCP and T400-4

Boston Acoustics SPG 555

Kenwood eXcelon 995

RF Punch 6.5" components and MB Quart Premium 6x9"s

Powermaster Alternator, YellowTop D34, Vmax CT1000

Posted
I hope you have the pass lock deal because you need it in that car

yeppers just ordered it now. so when it comes i might start it. and i guess i need to get a couple diodes too.

Posted
yeppers just ordered it now. so when it comes i might start it. and i guess i need to get a couple diodes too.

hate to be a little late on this one..but that vehicle doesnt really need a bypass module..a resistor will do the trick on passlock 1 everytime

1996 S-10 Blazer

Kenwood DNX-6140

(2)Kinetik HC2000

(2)US Amps MD3Dv2

US Amps MD42v2

(4)Hertz HCX-165 (front doors)

(2)Hertz HL-70 (dash)

(2)Hertz HT-25 (dash)

(2)Hertz SX-380D

Posted
hate to be a little late on this one..but that vehicle doesnt really need a bypass module..a resistor will do the trick on passlock 1 everytime

i had no idea. but i ordered already so yeh well. thanks for the info though

Posted
i had no idea. but i ordered already so yeh well. thanks for the info though

its all good..the resistance learning bypasses work just as well

1996 S-10 Blazer

Kenwood DNX-6140

(2)Kinetik HC2000

(2)US Amps MD3Dv2

US Amps MD42v2

(4)Hertz HCX-165 (front doors)

(2)Hertz HL-70 (dash)

(2)Hertz HT-25 (dash)

(2)Hertz SX-380D

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...