Jump to content

Recommended Posts

Posted

well heres to nites update. didnt have much time to do anything but still got some shiz done.

blackrosetiger this ones for you......

familymembers5020.jpg

start of mountin plexi

familymembers5014.jpg

familymembers5015.jpg

overveiw of where it goes

familymembers5016.jpg

installed...actually just sittin there cuz im still workin on figuring out adjusting the gains

familymembers5017.jpg

this is hole and cover for the electric antenna

familymembers5019.jpg

this is the switch to make the antenna go up/down...installed

familymembers5018.jpg

so thats what i got done today. next project is setting the gains (properly) if i can. speakers

for the bow should be here friday still, so check in then to see that. oh made a video but will need kids help to upload it and check it out to see if its worth watching or if i need to do some thing else in recording them

thanks for lookin.......matthew

thanks for comments on the plexi-logo

sony m60ui

polk mid/hi's

infinity 6000m on tower

fosgate p3d212 x2

fosgate p400-4

fosgate t1000-1bd

im ona boat bitch

My boat build

funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail :)

Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!!

Posted

damn....is everyone working or what. gotz no love from those last pics. good thing im building this for me and not accolades.hahaha

here is pic of engraver i used on plexi.

familymembers5025.jpg

ok these panels rattle like two midgets wrestling in the back seat after i set my gains

familymembers5036.jpg

so the bow seats come back out

familymembers5028.jpg

them woof boxes come back out

familymembers5027.jpg

then those panels come off

familymembers5029.jpg

and it ends up lookin like this

familymembers5026.jpg

mmmmoooaaarrr bein uploaded

sony m60ui

polk mid/hi's

infinity 6000m on tower

fosgate p3d212 x2

fosgate p400-4

fosgate t1000-1bd

im ona boat bitch

My boat build

funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail :)

Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!!

Posted

ok these panels get bolted on and no matter how tight i get them, they still rattle. so those bolts were cut off

familymembers5030.jpg

familymembers5039.jpg

i put the woofers back to be sure and yep im sure its those panels

familymembers5035.jpg

oh and these 1/2 pvc pipes that they used for the wire loom along the insides of the panels

familymembers5033.jpg

so put the panel back on and screwed it from this side through the bulk head and into the backside of the panel

familymembers5034.jpg

someone asked about securing the woofs and here you can see old 6x9's hole where they get attached to.i just use the old screw hole

familymembers5032.jpg

sony m60ui

polk mid/hi's

infinity 6000m on tower

fosgate p3d212 x2

fosgate p400-4

fosgate t1000-1bd

im ona boat bitch

My boat build

funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail :)

Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!!

Posted

so the panels back on and tested to see if it rattles

familymembers5036.jpg

they do pretty good once there secured for 900+ watts

familymembers5037.jpg

the brace i used to push the panels against each other so i could screw them in tightly

familymembers5040.jpg

both panels done and woofs back.....only 3 hrs of b.s.

familymembers5041.jpg

this is the pocket that covers the elec. antenna

familymembers5038.jpg

i know that none of you guys like these but its a boat. dont need to over charge the starting batt cuz im keepin the stereo batts and startin batt separate

familymembers5043.jpg

as of now ups still hasnt delivered my bow speakers but they r in town. i'll do that tomorrow and some more wiring.mmmooaarrr pics tomorrow

thanks for lookin........matthew

sony m60ui

polk mid/hi's

infinity 6000m on tower

fosgate p3d212 x2

fosgate p400-4

fosgate t1000-1bd

im ona boat bitch

My boat build

funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail :)

Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!!

Posted

ups @ 9:30 pm mountain zone. remind me to never go to work for them. especially on a friday. wiil get pics posted of them and work later.

rattles sux but thats what i get i guess. :angry:

sony m60ui

polk mid/hi's

infinity 6000m on tower

fosgate p3d212 x2

fosgate p400-4

fosgate t1000-1bd

im ona boat bitch

My boat build

funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail :)

Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!!

Posted

naw i was going to leave it open on the sides of the woofers. last summer we would put towels in that area.

well here's today's pics

familymembers6005.jpg

familymembers6006.jpg

familymembers6007.jpg

and of course they are bigger than the other 5 1/4's

so...bow seats out again

familymembers6009.jpg

and this thing was already taken home but had to go get it again.nothin like cuttin the shit outta your boat.ftl

familymembers6008.jpg

but it is for the greater good

familymembers6010.jpg

they are both in and hooked up

familymembers6011.jpg

sony m60ui

polk mid/hi's

infinity 6000m on tower

fosgate p3d212 x2

fosgate p400-4

fosgate t1000-1bd

im ona boat bitch

My boat build

funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail :)

Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!!

Posted

with seats installed

familymembers6012.jpg

and these wired up. the red thing is called a "perko switch". it lets you choose batt 1 or 2 or both to start your engine. i wired it so batt 1 is engine and batt 2 is the stereo. i should be able to run stereo with out draining my starting batt.

familymembers6013.jpg

arizona iced tea made in new york city."get a rope"

familymembers6014.jpg

this landed while i was doin wiring so i took some pics.

familymembers6015.jpg

familymembers6016.jpg

still mmmoooaarrr to come but im tired so....

thanks for lookin....matthew

sony m60ui

polk mid/hi's

infinity 6000m on tower

fosgate p3d212 x2

fosgate p400-4

fosgate t1000-1bd

im ona boat bitch

My boat build

funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail :)

Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!!

Posted

familymembers6013.jpg

That perko switch has saved my ass several times. Got one in my boat, its a must have when running a stereo. Just don't forget to leave it on both batteries when your out jammin on the water.

It's all gone!

The Celica Build

Feedback

If I buy something from you, DO NOT USE FEDEX!

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...