fox_racin4 Posted March 17, 2010 Report Share Posted March 17, 2010 rc.btls box is on the small side as well ( 5.X cubes) IIRC set your gain with a dmm turn your HU up till it sounds distorted back it off a bit ( unhook the sub) find a 50hz tone hook up a dmm to output and set the gain for 49V ( just under 2200rms) and you should be good no clipping Quote 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
fox_racin4 Posted March 17, 2010 Report Share Posted March 17, 2010 theres a chart somehwere that tells you how to do it and what to set amp at but i cant seem to find it im sure others know what im talking about Quote 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
Noobtastic14 Posted March 17, 2010 Report Share Posted March 17, 2010 a guy at my shop told me clipping is like when u have a sine wave and its a wavy line or somethin like that and u start clipping when that lines goes up and straight instead of wavy. true?? Check this out- will show you exactly what a clipped wave is. -Drew Quote I am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. uhoh_45 said: dont be a pussy P give the jeep to drew Link to comment Share on other sites More sharing options...
skittlesRgood Posted March 17, 2010 Report Share Posted March 17, 2010 hey, i made one of those vids too Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
STEvil Posted March 17, 2010 Report Share Posted March 17, 2010 rc.btls box is on the small side as well ( 5.X cubes) IIRC set your gain with a dmm turn your HU up till it sounds distorted back it off a bit ( unhook the sub) find a 50hz tone hook up a dmm to output and set the gain for 49V ( just under 2200rms) and you should be good no clipping What about the level of the tone used? If its not equal with the audio used to find the distortion point of the HU then you're not doing a good job. Also you will need to run a sine sweep after setting the gain to test other frequencies to see if any of them clip.. Quote MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed. Link to comment Share on other sites More sharing options...
fox_racin4 Posted March 17, 2010 Report Share Posted March 17, 2010 i use a 0db 50hz tone and havent had a problem yet Quote 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.