bmongo18 Posted March 16, 2010 Report Posted March 16, 2010 If so does anyone know sensitivity and the rms power on them and if they can make a 4" mid range Quote
EricR Posted March 16, 2010 Report Posted March 16, 2010 AA makes carbon fiber mids and they are awesome. Quote i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
bmongo18 Posted March 16, 2010 Author Report Posted March 16, 2010 What's sensitivity and the rms power Quote
wL<3bass Posted March 17, 2010 Report Posted March 17, 2010 Something like 80-120wrms for the mids... They make just the carbon mids or you can get them as the havoc component set with is active. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.