Box help Audioque 15 HDC3

[Traks]

ya it was originally designed for SPL,now to redo it. 4 cubes at 36hz on its way.thanks for all the help guys.

[Traks]

could someone double check this for me please?

width 35.5"

height 17.5"

depth 20 1/8 "

4" slotport 16" high and lenght of 26 3/4" for around 36hz?

left some room for 45*s,sub displacement and bracing

[chewie]

do the big three on your truck.. cept run ground from the alt directly to the frame. and then run your ground for your cabin through the floor to the frame.. you will see a significant increase in voltage

why not do four 4 inch round ports 15 inches long

for 4.91 cubes after sub and bracing and port displacement. tuned to 36 hz.

[Traks]

do the big three on your truck.. cept run ground from the alt directly to the frame. and then run your ground for your cabin through the floor to the frame.. you will see a significant increase in voltage

why not do four 4 inch round ports 15 inches long

for 4.91 cubes after sub and bracing and port displacement. tuned to 36 hz.

Hmmm I might give that a try. Also I am ordering all new 0 gauge wire when I redo it,I want all new. The wire in it is a few years old so I will add what you suggested and give it a try.