killallblue Posted April 9, 2010 Report Posted April 9, 2010 i have a huge crack in my exhaust on my header on chamber 4 i dont have the money to buy a new one any ideas or dose any one have one laying around Quote
cmamtower Posted April 14, 2010 Report Posted April 14, 2010 weld it for temp use until you can buy a new one Quote apparently you dont get the fact that the subaru was wrapped around a pole. and by the status of your comment, im guessing your mouth is too. Vehicle: 1997 Honda Civic EX Exterior: 55w 5k Headlights and 35w 3k JDM Fogs. Lowered. Sittin on steelies right now Amplifiers: Rockford Fosgate P450.4 Batteries: Kinetik HC 800 Electrical: Big 3 in 1/0 Enclosure: n/a : ( Headunit: Clarion VZ409 Mids/Highs: Pheonix Gold Rsd6.5's in the Front Doors Subwoofers: n/a : ( Wire: Knukoncepts 1/0 and 4g Future Upgrades: 20% tint all around, GC/Koni coilovers, body work (fml) lol
Gutta Trash Posted April 14, 2010 Report Posted April 14, 2010 if you are in need of a quick fix (if you can't get it welded which is best) go to Autozone and they sell a tape for covering exhaust leaks Quote On 4/20/2010 at 10:06 PM, 'cc_audio' said: Guys are just like girls, once you've had 18 inches you don't go back. 2004 GMC Yukon XL Pioneer AVH-X4700BS 13 band EQ Sub Amp- (2) PPI 5000BD.1 (2) Re SXX 15's 8 cu. ft. box tuned to 32 Hz (4) 6.5 Bose Mids (2) 1" Bose Tweets (2) 1.5" Bose Tweets (1) JY 80 AH w/ new JY busses (1) Duracell 750 up front Apex Alternators 270 A.C. Delco 160 alternato
byers319 Posted April 22, 2010 Report Posted April 22, 2010 how big of crack are you talking? just like a crack down the side that you couldnt stick a pencil tip threw or like a crack you couldnt put your finger through Quote
BeatBox Posted April 22, 2010 Report Posted April 22, 2010 how big of crack are you talking? just like a crack down the side that you couldnt stick a pencil tip threw or like a crack you couldnt put your finger through i think that would be considered a hole not a crack Quote
killallblue Posted April 22, 2010 Author Report Posted April 22, 2010 well i geuse its a hole then its big enough to not have back pressure on cylinder number 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.